Searching for Y
If your TV or VCR does not respond to the SO EASY after tr
the codes listed for your brand, try searching for your code:
T
Press the TV (or VCR) key on the SO EASY .
Then, press and hold the MAGIC key until the
light blinks twice (the light will blink once
then twice).
Next, press the Programme- key three times.
Alternate between TV and POWER until your
T
POWER until your Video turns off).Y
have to press these keys many times, so be
patient. Remember
at your device the entire time you are
searching for your code.
When your device turns off, press and release
MAGIC. Don’t forget, press MAGIC as soon as
your device turns off.
The SO EASY is now ready to run your device. When you want to
control your device, press the device key first.
Important notes:
- T
instructions above, only press the VCR key during steps 2 and 4.
- If your Video’
key
- During step 4, you may have to press these keys many times (up
to 150!), so be patient. Remember
your device the entire time you are searching for your code.
Code Blink Out
After you have used the Search Method, you can find out which
code the SO EASY is using by blinking back the code. It’
know your T
you can only blink back your code after the SO EASY is operating
your TV or VCR.
T
Press the TV (or VCR) key on the SO EASY
Then, press and hold the MAGIC key until the
light blinks twice (the light will blink once
then twice).
Next, press Programme-, Programme-,
Programme+.
For the first digit of your 5-digit code, press
Vand count the red blinks.
For the second digit, press Volume- and count
the red blinks.
For the third digit, press Programme+ and
count the red blinks.
For the fourth digit, press Programme- and
count the red blinks.
For the fifth digit, press PLAand count the
red blinks.
Now you have your 5-digit code. Write your code in the boxes
provided previously for easy future reference.
Important notes:
- T
instructions above, only press the VCR key during step 1.
“SO EASY”
USER GUIDE & CODE BOOK
Universal Remote
Retain For Future Reference
URC-2530
700414
ABOUT YOUR SO EASY
Features and functions Front Page
INST
Front Page
SETTING UP THE SO EASY
Front Page
TROUBLE-SHOOTING
Searching For Y Front Page
Code Blink Out Front Page
Helpful Hints Front Page
Consumer Help-Line Front Page
ADV
Controlling Colour & Brightness Back Page
Punch-Through Back Page
SET
Back Page
Thank you for purchasing the ONE FOR ALL “So Easy” universal
remote control (URC-2530). Y
The SO EASY Remote Control
THE SO EASY User Guide & Code Book
The User Guide & Code Book explains in simple steps how to set up
and operate your new universal remote control. Y
guide again in the future, so please be sure to keep it.
Y
Y
T
on the next page describe the features and functions of the SO EASY
universal remote control.
Features and Functions
Key Function
LED LED
The LED (Light Emitting Diode) flashes red to show
the remote is working.
MAGIC
The MAGIC key is used to set up your SO EASY and to
access special features.
Power
The Power key controls the same features as your
original remote control.
Device Keys
The TV and VCR keys select the home entertainment
device to be controlled. For example, pressing the TV
key allows the remote to control the functions of your
T
Video Recorder
V
-
The V
most frequently used functions of your devices. They
operate just as those on your original remote contr
These keys are also used to set up your device.
Video Recorder Keys
After pressing the VCR key
operate the functions of your Video Recorder
T
be pressed twice.
The SO EASY needs two new AAA/LRO3 alkaline batteries.
Remove the battery cover from the back of
the SO EASY
Match the batteries to the +/- marks inside
the battery case, then insert the batteries.
Press the battery cover back into place.
Important note:
- In order to avoid having to reprogramme your SO EASY after you
remove the batteries, you will need to insert new batteries within
15 minutes. Also, it is best that you do not use r
batteries.
T
T
Find your T
section (see reverse). Codes are listed by brand
name. The most popular codes are listed first.
Press and release the TV (or VCR) key on the
SO EASYMAGIC key
until the light blinks twice (the light will blink
once then twice).
Enter your 5-digit code according to the
chart below
V = 1
V = 2
Programme+ = 3
Programme- = 4
Now
press POWER . If your T
your SO EASY is ready to operate your
T
Important notes:
- T
above, only press the VCR key during step 3.
- If your device does not respond, follow steps 1-5 with each code
listed for your brand. If none of the codes listed for your brand
operate your device, follow the Search Method described in the
next section. The Search Method can be used even if your brand
is not listed at all.
- Remember
with the SO EASY
- Write the codes for your TV and VCR in the boxes provided for
easy future reference.
TV Code
VCR Code
Setting Up The SO EASY
1
2
3
4
ONE FOR ALL
Acura
Admiral
Adyson
Agazi
AGB
Aiko
11132
12224 12242 23313
14232
21131
31121
14231 11132 11322
22414 11314 12131
22332 13444
,,
,,
,,
,,
,,
,,
,,
,,
5
4
MAGIC
V
Rewind
Pause
V
Power
VCR
Programme -
Fast
Forward
Record
Stop
Programme +
Play
■■ ■■ ■■ ■■ ■■
■■ ■■ ■■ ■■ ■■
Helpful Hints
Problem: Solution:
Consumer Help-Line
If you have any questions about the operation of your new ONE
FOR ALL Universal Remote Control, you may call our consumer help-
line for assistance. Before calling, please read this manual car
to find the answer to your question. If you cannot find a solution in
this manual, please complete the information below on all your
equipment before calling. This way we can better ser
In the UK: phone: 0800 966 194
fax: +31 53 432 9816
e-mail: ofahelp@ueic.com
In Ireland: phone: 1-800 553 118
fax: +31 53 4329816
e-mail: ofahelp@ueic.com
In Australia: phone: 1-800 064 472
e-mail: ofahelp@ueic.com
Y FOR ALL model number: URC-2530
Date of purchase: day /month /year
day/month/year
Y
(The first row is an example of how to complete this table)
TYPE BRAND MODEL NR. REMOTE MODEL NR.
TV Sony KVX-2950B RMT
Installing The Batteries
1
2
3
Contents
About Y
Replace batteries with 2 fresh,
new AAA/LR03 alkaline batteries
Make sure you are using new
batteries and are aiming the ONE
FOR ALL at your device.
A) T
brand. B) T
T
Y
Start the search method over
again to locate the proper code.
Press TV
the light blinks twice.
Then press:
(Programme-)
(Programme+)
(Programme-)
Red light does not blink
when you press a key?
The ONE FOR ALL does not
respond after pressing a
key?
The ONE FOR ALL does not
operate your device?
Y
the ONE FOR ALL code
section?
The ONE FOR ALL is not
performing commands
properly?
Y
programme 1 when you
press the power key before
switching off OR you must
press Power twice to switch
on your TV?
UK
TV
