NOTE: If your TV/VCR works with one of the above codes
highlighted with an asterisk (*), you may need to program a
separate TV code to control the volume. Check the list of
codes below and follow the instructions in the “Programming
the Cinema 5 to Operate Your TV” section to program the
supplied TV code.
TV/VCRs working on VCR code 0032 may require
TV code 0000 for volume control.
TV/VCRs working on VCR code 0035 may require
TV code 0051 for volume control.
TV/VCRs working on VCR code 0048 may require
TV code 0093 for volume control.
TV/VCRs working on VCR code 0060 may require
TV code 0047 for volume control.
TV/VCRs working on VCR code 0081 may require
TV code 0054 for volume control.
TV/VCRs working on VCR code 0162 may require
TV code 0250 for volume control.
TV/VCRs working on VCR code 0278 may require
TV code 0451 for volume control.
Programming the Cinema 5 to operate your Cable
Converter or Satellite Receiver:
Locate the brand name of your Cable Converter or Satellite
Receiver in the “Setup Codes for Cable Converters” or “Setup
Codes for Satellite Receivers” section (starting on the next
page), and write it in either space below.
Cable Converter Brand:____________________________________________________________________________________
________________________________________________
or
Satellite Receiver Brand:______________________________
________________________________________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first.You will use one of these codes to pro-
gram your Cinema 5 to operate your Cable Converter or
Satellite Receiver as follows:
1. Turn on your Cable Converter or Satellite
Receiver.
2. Press CBL/SAT and release. Press and hold SETUP
until the Cinema 5’s red light blinks twice, then
release SETUP.
3. Enter the first four-digit Cable Converter or
Satellite Receiver code listed. If you perform this
procedure correctly, the red light will blink twice
when you enter the final digit of your code.
4. Aim the Cinema 5 at your Cable Converter or
Satellite Receiver and press POWER.Your Cable
Converter or Satellite Receiver should turn off. If it
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one
that operates your Cable Converter or Satellite
Receiver.
NOTE: If you have tried all the codes listed for
your brand and your Cable Converter or Sateliite
Receiver does not respond, try using “SEARCH-
ING FOR YOUR CODE”.
5. Your Cinema 5 is now programmed to operate
your Cable Converter or Satellite Receiver. Write
your Cable Converter or Satellite Receiver code in
the boxes to the left for future reference.
Remember, if you want to use your Cinema 5 to operate
your Cable Converter or Satellite Receiver, press the
CBL/SAT key first.
Setup Codes for Cable Converters
ABC 0003, 0008, 0014, 0007, 0001, 0011,
0013, 0017
Allegro 0153, 0315
Gantronix 0022, 0207
Archer 0797, 0153, 0022, 0207
Belcor 0056
Cable Star 0056
Cabletenna 0022
Cableview 0022
Century 0153
Citizen 0153, 0315
Colour Voice 0031
Comtronics 0040
Contec 0019
Digi 0637
Eastern 0002
Emerson 0797
Everquest 0015, 0040
Focus 0400
Garrard 0153
GC Electronics 0056, 0207
Gemini 0015
General
Instrument 0476, 0003, 0014, 0011, 0276, 0810
Goldstar 0144, 0040
Goodmind 0797
Hamlin 0259, 0009, 0020, 0034
Hitachi 0011
Hytex 0007
Jasco 0153, 0315, 0015
Jerrold 0476, 0003, 0014, 0011, 0012, 0015, 0810
Linsay 0440
Magnavox 0027, 0014
Memorex 0000
Movie Time 0063, 0156
Novaplex 0618
NSC 0063, 0156
Oak 0007, 0019
Optimus 0021
Panasonic 0021, 0107, 0000
Panther 0637
Paragon 0000
Philips 0153, 0027, 0031
Pioneer 0144, 0023, 0533
Popular
Mechanics 0400
Prelude 0770
Pulsar 0000
RadioShack 0015, 0315, 0797, 0833
RCA 0021
Realistic 0207
Recoton 0400
Regal 0259, 0020
Regency 0002
Rembrandt 0011
Runco 0000
Samsung 0144, 0040
Scientific Atlanta 0477, 0008, 0017
Seam 0510
Signal 0015, 0040
Signature 0011
SL Marx 0040
Sprucer 0021
Starcom 0003, 0015
Stargate 0015, 0040, 0797
Starquest 0015
Sylvania 0001
Tandy 0258
Teleview 0040
Texscan 0001
TFC 0310
Timeless 0418
Tocom 0012, 0013
