Bedienungsanleitung One for All URC-6692 (Seite 13 von 72) (Englisch)

492798

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

OWNER’S MANUAL

Using Macros 11

6. To check for codes of other devices,

repeat steps 1 through 5, but

substitute the appropriate device key

for each device you are checking.

USING MACROS

With programming, the M1 and POWER

keys on your OFA Kameleon™ 6-Device

Hybrid Remote (URC-6692) can be setup to

perform repetitive, time-consuming

operations for easy, convenient access

through the press of a single key. Macro

keys are ideal for home theater operations,

setting a favorite channel, guide steps, or

other multiple functions you would like to

control with one key press. Moreover, each

macro key can hold up to 15 key presses

total.

NOTE: Programming a new macro over an

existing one will erase the original macro.

PROGRAMMING A FAVORITE CHANNEL

With so many channels available through

your cable or satellite system provider, you

can program a macro that directly selects a

favorite channel with one key press. For

example, let’s assume your favorite cable

programs are on channel 52. Use the

following instructions to program a macro

key for direct access of this channel:

NOTE: This example assumes the TV is

tuned to the correct Input to view your

cable box.

1. Press and hold SET until the two Inner

IR segments flash twice. The current

mode key will blink on and off during

programming.

2. Enter 9 9 5. The Inner IR segments

will blink twice.

3. Select an open macro key (e.g., M1)

and press it once.

4. Press CBL once.

5. Enter the channel number, 5 2.

NOTE: If you have access to over 100

channels, enter 0 5 2. Also, if the original

remote control required pressing Enter to

change the channel, also press Enter after

the channel number (e.g., 0 5 2 Enter).

NOTE: You can program up to 15 keypresses

on each macro key.

6. P

ress and hold

SET

until the Inner IR

segments blinks twice, then release

SET

Now when you press M1, you will instantly

see cable channel 52 on your TV set.

PROGRAMMING A MASTER POWER MACRO

In its default state, the POWER key on the

OFA Kameleon™ 6-Device Hybrid Remote

(URC-6692) will individually power your

home entertainment devices on or off.

However, you can also program a Master

Power Macro onto the POWER key that will

sequentially turn on or off all the devices

with a single key press.

To program the Master Power Macro:

1. Press and hold SET until the two Inner

IR segments flash twice. The current

mode key will blink on and off during

programming.

2. Enter 9 9 5. The Inner IR Animation

will blink twice.

3. Press the POWER key once.

4. For the first device you want in the

power-on sequence, press its device

key (e.g., TV) once.

5. For the second device you want in the

power-on sequence, press its device

key (e.g., CBL/SAT) once.

6. For the third device you want in the

power-on sequence, press its device

key (e.g., AUD) once.

OFA Kam 6 Hybrid Owners Manual Fr-Eng.fm Page 11 Monday, April 11, 2005 12:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All URC-6692 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info