Bedienungsanleitung One for All URC 8090 (Seite 16 von 22) (Englisch)

492763

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

HOW TO USE THE SHIFT KEY

The

Home Producer 8

has features that can be

accessed by using the SHIFT key. These features

are listed above the key that they are mapped to.

For example, on the transport keys (PLAY, REW,

FF, STOP and PAUSE) there are the following

features: SLOW, SLOW +, SLOW -, X2 and

EJECT. These are accessed by pressing SHIFT

and the key, for example, to eject a tape from your

VCR press:

SHIFT + STOP

This will eject your tape, as long as your original

remote supported this feature.

Note: Once you have pressed the SHIFT key, the

Home Producer 8 will remain in the "Shift" mode,

indicated by a

on the LCD screen, for 5 seconds

after the last key press or until the SHIFT key is

pressed again.

The following keys have functions that are shifted:

CENTER: SHIFT + CENTER = REAR

MENU: SHIFT + MENU = PROGRAM

SELECT: SHIFT + SELECT = CLEAR

MUTE: SHIFT + MUTE = SLEEP

PREV CH: SHIFT + PREV CH = DISPLAY

PIP: SHIFT + PIP = FREEZE PIP

REW: SHIFT + REW = SLOW-

PLAY: SHIFT + PLAY = SLOW

FF: SHIFT + FF = SLOW +

STOP: SHIFT + STOP = EJECT

PAUSE: SHIFT + PAUSE = X2

For a more detailed explanation of what function

each shifted key performs by device type (TV, VCR,

etc.), please refer to pages 45 through 57.

REPEATING A SERIES OF KEY PRESSES USING

THE AUD AND VID KEYS

The

Home Producer 8

has two Macro keys (AUD

and VID) that allow the user to play back a series of

key strokes at any time with the press of one key.

Each sequence can have up to a maximum of 15

keystrokes. For example, to set up a sequence that

will turn on your devices and turn the devices to the

proper inputs:

1 Press and hold MAGIC until the

display screen changes from

[DEVICE and the TIME] to

[TIMED SEQ]. Press MENU -

twice until the display reads

[CONFIGURE], then press SELECT.

The display will then read

[THEATR SEL].

2 Press MENU - four times until the

display reads [KEY MACRO]. Press

SELECT. The display will read

[SEL MACKEY]. Press either the

AUD or VID sequence key. This will

be the key that will play back the

series of keystrokes assigned to that

key. The display will then read

[SELECT SEQ]. Begin entering the

sequence of keystrokes, up to 15,

that you wish to be played back

when you press either AUD or VID.

For example:

TUN + POWER + TV + POWER +

TV/SAT (To change the input on the

TV to VIDEO 1) + SAT + POWER.

NOTE: You cannot use either the AUD or VID keys

in your macro sequence.

3 When your macro sequence is

concluded, press ESC to save.

Whenever the sequence key is pressed, the Tuner will

power ON, the TV will power ON and change the input

to VIDEO 1 and then the Satellite will power ON.

Repeat these steps to then setup the other se-

quence key (either AUD or VID) to your needs.

NOTE: If you make a mistake during the setup of a

macro sequence, press ESC to return to the main

display screen and begin the setup of your sequence

again.

MENU-

AUD

VID

(Sequence)

MENU-

x 2

x 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All URC 8090 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info