Bedienungsanleitung One for All URC 8210 - Kameleon 10 (Seite 24 von 247) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

585195

Zoom out

Zoom in

Vorherige Seite

1/247

Nächste Seite

WWW.ONEFORALL.COM 23

Macros (sequence of commands)

Macros (direct)

You can program your KAMELEON 10 to issue a sequence of commands at the

press of one button. For example, you may want to turn off your TV, VCR and

Satellite at the same time. Any sequence of commands you regularly use can be

reduced to one key stroke for your convenience. A key that is programmed with

a Macro works through all modes (provided it’s accessible in that mode).

Therefore a Macro can best be set on either the A, B or C key. However, you can

install a Macro on any key (provided it’s accessible in that mode), except for the

device keys (TV1, TV2, VCR, AUX1, SAT, AUD1, AUD2, CD, AUX2 and DVD), the

MAGIC key and the SCROLL key.

Example: To set up a Macro

that switches off your television, video recorder and

satellite receiver

on the “A” key on your KAMELEON 10:

1. Press and hold MAGIC until the rabbit comes out of the hat (the screen

will change to the setup screen).

2. Press MACRO.

3. Press the device key (e.g. TV1) to display all keys of the mode.

4. Then press the key to which the Macro will be assigned, in this case the

“A” key.

5. Next press TV1, POWER, VCR, POWER, SAT, POWER.

6. To store the Macro, press and hold MAGIC until you get two blinks on

the IR Indicator and the rabbit disappears (the screen will return to the

setup screen).

Result: Whenever you press the “

A” key, the KAMELEON 10 will turn off your

TV, VCR and Satellite receiver.

- Each MACRO can consist of a maximum of 15 keystrokes.

- To include a function from a particular screen in a mode, use the SCROLL

key.

- Make sure that you program a Macro on a spare key that you don’t use in

any mode.

- Once you program a Macro on a specific key, the sequence will work

regardless of the mode (TV1, TV2, VCR, AUX1, SAT, AUD1, AUD2, CD, AUX2

or DVD) you are using (if the label is the same as the label on which the

Macro was programmed). This means that the function picked on that

specific key will be sacrificed.

- To avoid accidental recordings with the KAMELEON 10, you must press the

RECORD key twice to begin recording. Please note that if you assign a

Macro or Shifted Macro to the RECORD key, this will deactivate the double

key press. Therefore we recommend not to assign a Macro to this key.

- If you had to hold down a key for a few seconds on the original remote

control to get a function, this function may not work in a macro on your

KAMELEON 10 remote.

- Keys such as (TV) menu, (VCR) menu etc. will not change screen when

pressed during Macro programming.

- Upon changing the batteries your Macro(s) will be retained.

- If you program a Macro on a key, the original function will become shifted

(excluding POWER, CH+/- and VOL+/- keys). Press MAGIC then the key to

access it. If you place a Macro on a digit key, access the original function by

pressing MAGIC twice and then the digit key.

- You can replace a Macro by placing another Macro on top.

Extra Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All URC 8210 - Kameleon 10 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info