HOME THEATER
The HOME THEATER mode key allows you to bring the most commonly used
functions of your home theater components to one mode key. By doing this
you can configure the keypad to meet your specific home theater needs.
You can define by key grouping, which component should be controlled.
The steps below will guide you through programming the Home Theater
key.
Setting Up the Home Theater Key
For example, to configure the keypad like this:
Example:
Key Grouping: To be controlled by:
Audio (Volume) Keys Tuner
Channel Keys Satellite
Playback (VCR) Keys VCR
PIP Keys TV
Menu/Surround Keys Amplifier
Press and release the HOME THEATER mode key.
Press and hold MAGIC until the display changes from
[THEATER and TIME] to [TIMED SEQ].
Press MENU- two times and the display will read
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL]. Press ENTER.
The display will read [AUDIO] which refers to the volume
and mute keys. Press ENTER. The display will change to
[AMP], or if you have redefined the Amp key, it would
read [TV2], [SAT2] and so on.
At this screen you will press the Device Key you want to
be controlled by the volume keys in the Home Theater
Mode. Following the example above, you would press
TUN. Once you have made your selection, press ENTER.
The display will change to [CHANNEL] which refers to the
number keys and CH+/-. Press ENTER. The display will
change to [TV].
At this screen you will press the Device Key you want to
be controlled by the channels keys in the Home Theater
Mode. Following the example above, you would press SAT.
Once you have made your selection, press ENTER.
17
Advanced Functions
Note: The Home Theater key should only be set up after you have all your
devices working with the Topline 8.
2
3
4
1
5
