28
TROUBLE SHOOTING
Problem:
The LCD screen begins to fade or
text does not appear?
You cannot get the Topline 8 to
operate your device(s)?
Your brand is not listed in the ONE
FOR ALL code section?
The ONE FOR ALL is not performing
commands properly?
You can turn your device off but
you can not turn it on?
You made a mistake when setting
up your Topline 8?
You made a mistake when entering
a Sequence or Timed Sequence?
Problems changing channels?
Video not recording?
Scan does not work on your device?
Your audio components turn on and
off but will not control other
functions?
Your DSS satellite receiver does not
respond to the codes listed in the
manual?
Solution:
Replace the batteries with four new
AAA/LRO3 batteries. The Topline 8
should retain the codes you have
programmed, however, you will
need to reset the clock (see page 9)
A) Try all the codes listed for your brand.
B) Try the Search method (page 13).
C) Make sure the device you are
setting up is able to be operated
with an infrared remote control.
Try the search method on page 13.
You may be using the wrong code.
Start the search method over again
to locate the proper code.
If, on your original remote, you had
to press a number key to turn on
your device, you should do the same
on the Topline 8.
During any set-up procedure, except
for Sequences and Timed Sequences,
the ESC key will return you to the
main screen with out saving.
If you made a mistake when setting
up a Sequence, erase the incorrect
sequence by re-saving a new
Sequence under the same key. If you
made a mistake when entering a
Timed Sequence, return to the Timed
Sequence menu and delete the
incorrect sequence.
Enter the programme number
exactly as you would on your
original remote.
As a safety feature on your ONE FOR
ALL, you must press the Record key
twice .
Make sure your original remote had
a programme +/- key.
Some audio components may need
both a Tuner code and an Amplifier
code to control all the features of
your audio component,
Make sure the DSS Receiver you are
setting up is able to be operated
with an infrared remote control and
not set up to only receive Radio
Frequency.
