492791
15
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
29
Finding Out Your Code
After you have set up your components using the
search, you may need to find out which four-digit
code is operating your components. For example, to
find out what four-digit code is operating your TV:
1 Press and release the TV key.
2 Press and hold SETUP until the
display screen changes from
[TV and the TIME] to [TIMED SEQ].
3 Press the MENU – key one time.
The display screen will change to
[CODE SETUP]. Press SELECT.
The display will change to
[DEV SET UP].
4 x2 Press MENU – twice. The display
will change to [DEV NUMBER].
Press SELECT. The display will then
change to [TV and your code]. Write
down the code in the below boxes
and press ESC to return the display
to [TV and the TIME].
TV code:
VCR Code:
Cable Code:
Satellite Code:
Tuner Code:
Amplifier Code:
CD Player Code:
DVD/LD Player Code:
28
SETTING UP THE HOME THEATER KEY
The HOME THEATER mode key brings all of the
most commonly used home theater functions into
one mode of the a/v Producer. When setting up this
key, you will choose which components will
control your volume, channel changing, playback,
Picture-in-Picture and menu functions.
1 Press and release the HOME
THEATER mode key.
2 Press and hold SETUP until the
display screen changes from
[THEATER and the TIME] to
[TIMED SEQ].
3 x2 Press the MENU – key twice, the
display will change to [CONFIGURE].
Press SELECT, the display will
change to [THEATR SEL], press
x2
SELECT. The display will change
to [AUDIO].
4 Press SELECT. This will change the
display to [AMP] or, if you have
redefined the AMP key, the display
would read [TV2], [DVD2], [SAT2]
and so on. At this screen you will
select the device that will control
your Volume in the Home Theater
(Device Key) Mode. Use the device keys AMP,
TUNER, TV, CBL/SAT or DVD to
choose your AUDIO selection.
Once you choose the AUDIO
source, press SELECT.For
example, if your Tuner will control
your volume in the Home Theater
Mode, press TUNER + SELECT.
The display will change to [CHAN-
NEL]. This will allow you to choose
the device that will control your
channel changing.
(continued on next page)
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für One for All URC-8800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von One for All URC-8800

One for All URC-8800 Bedienungsanleitung - Deutsch - 2 seiten

One for All URC-8800 Bedienungsanleitung - Französisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info