HOME THEATER (continued)
PROGRAMMING THE HOME THEATER POWER MACRO
1. If necessary, perform steps 1 through 3 of the previous section (Programming
Home Theater Devices
on page 67) to view the Theater Setup Menu.
2. In the
Program Power Macro sub-menu,tap on the NEW key.You will see the
THEATER SETUP Device Selection Strip.
NOTE: Tapping on the NEW key will also override any previously-programmed Power Macro.
3. Using a procedure similar to the one described in Adding A Macro (starting on
page 39), tap on successive devices and their functions to program the macro.
4. After you have programmed the macro, aim Mosaic at your Home Theater system
and tap on the
TEST key. If the devices respond incorrectly, tap on the CLEAR key
and repeat steps 3 and 4.
5. If the devices do respond correctly, then tap the
OK key to save the macro. Mosaic
will ask you if you want to relabel the macro.
• To relabel the macro, tap on the
YES key.You will see the THEATER SETUP
Label Screen
. Follow the procedure that is similar to the one starting with step 3
on page 54 to relabel the macro and tap the
OK key when you’re done.
• To keep the macro labeled as
PWR,tap on the NO key.
70 Chapter 4: Personalizing Mosaic
MOSAIC
