Bedienungsanleitung One for All URC7125 (Seite 1 von 2) (Englisch)

673471

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ESPAÑOL

B  SET UP BY CODE

HOW TO SET UP YOUR REMOTE

f your brand is not listed in section A, you can set up your device by trying codes individually.

To do this:

1. T

urn your device on (not on standby).

2. Locate the brand of your device in the code list (pages 146-157). Codes

re listed by Device Type and Brand.

3. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

4. Press the MODE key repeatedly until the LED for the device you want to

set up is lit.

5. Enter the rst 4 digit code listed for your brand (e.g. 0556 for a Bennett

TV).

6. The LED will blink twice and go out.

7. Now aim the remote towards your device and press the POWER key.

8. If the device turns oﬀ, your remote is ready to use. If not, repeat steps 3-7 with the next code

in the list.

• Some codes are quite similar. If you nd that one or more keys do not operate as you expect,

try again from step 3 with the next code in the list.

ESPAÑOL

URC7125

SIMPLE SET UP GUIDE

ENGLISH

Open the battery door.

Insert 2 AAA batteries.

ENGLISH

KEY TABLE

HOW TO SET UP YOUR REMOTE

A – SIMPLESET

impleSet is a quick and easy way of setting up the remote to control the most popular brands of

each device type with only a few key presses, typically in under a minute per device. The rst step

is to select which device you are going to set up. The following is a list of Device Modes on the

emote control, and the Device types that can be set up on that mode:

Device Mode Type of device

TV T

V, HDTV, LED, LCD, Plasma, Projector

STB Set Top Box, Satellite Receiver, Cable Converter,

Freeview, DVB-T, IPTV

For each Device type, there is a list of the top brands, each with a number assigned to it,

for example 6 for a Samsung TV. Locate your device and brand in the list that follows:

1 Alba / Bush / Goodmans

2 Grundig

3 LG

4 Panasonic

5 Philips

6 Samsung

7 Sharp

8 Sony

9 TCL / Thomson

0 Toshiba

STB: Sat, Cable, DVB-T

1 BSkyB / Sky Ireland / Orange

2 Canal+ / CanalSat / Digital+

3 Dream Multimedia / TechniSat

4 DStv / Multichoice / Foxtel / Sky New

Zealand

5 Freebox / Tricolor TV / Vu+

6 Humax

7 Samsung

8 Sky Italia / SFR / Neuf TV

9 Sky Deutschland / Österreich /

T-Home / Deutsche Telekom

0 UPC / Cablecom / UPC Direct /

Virgin Media

MAGIC: Used to set up

your remote

+/-: Channel Up and Down

MENU: Show the menu of

the current device

EXIT: Exit from the Menu of

the current device

AV: Select the input on

the current device

INFO: Displays info of

current playback

POWER:

Power on/o

PP: Previous Program, Last

Channel

3D: Access 3D functionality if

applicable

Red, Green, Yellow, Blue –

Fastext/Quick access keys

PLAYBACK: Playback keys

for the current device

MODE: Scroll through

the devices your remote is

set up to control

WATCH TV: Combines TV and

STB into one mode

for TV viewing

FAV: Favourite Channels

GUIDE: TV Guide, EPG

SMART: Access internet

and Smart features

of your TV or internet-

connected device

BACK: Back one step in

the Menu of the current device

VOL: Volume Up, Down and

Mute

16:9: Adjust the Aspect

Ratio (screen size) of your TV

or Set Top Box

LIST: Displays a list of

recorded programmes

A – SIMPLESET

HOW TO SET UP YOUR REMOTE

To set up your device

1. Turn on your device (not on standby) and point the OFA remote towards it.

2. H

old down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

3. P

ress the MODE key repeatedly until the LED for the device you want to

et up is lit.

4. Hold down the digit for your brand and device as listed above (e.g. 6 for

amsung TV).

5. The remote will send Power every 3 seconds until your device switches oﬀ.

6. As soon as your device switches oﬀ, release the digit.

7. The LED will blink twice and go out. The remote should now operate your device.

• If you nd one or more keys do not work as you expect, start again at step 1 – the remote will

start with the next code in the memory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All URC7125 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von One for All URC7125

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info