719390
14
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
14
Shut o alarm
When alarm goes o, press the STANDBY BUTTON to turn o alarm, the alarm will reset
for next day.
How to turn o the alarm
To cancel the alarm mode: In “STANDBY OFF” mode, press AL.SET button to turn o the
alarm function (until alarm sign „
“ disappears on the LCD Display).
Adjust volume
Press VOL.+ button to increase the volume during “STANDBY ON” mode.
Press VOL. – button to decrease the volume. “STANDBY OFF”
Radio operation
1. Drücken Sie die Standby-Taste, um in den Betriebs-Modus zu wechseln.
2. Drücken Sie die Funktions-Taste, um in den Radio-Modus zu wechseln.
3. How to use the buttons for radio - Manual Tuning: Touch the SKIP+ / SKIP- button to
search for desired frequency. Higher frequency can be selected by touching the SKIP+
button while Lower frequency can be selected by touching SKIP- button - Automatic
Tuning: Touch & hold the SKIP+ / SKIP- button until the display frequency starts run OR
long press the SKIP button to activate Automatic Tuning OR when a station of sucient
strength has been found Tuning will stop or you can stop the automatic tuning by pres-
sing SKIP+ / SKIP- button.
4. To turn o the radio, Press the STANDBY button.
Preset Tuning
Select your desired station according to the normal tuning procedure.
Press the MEMORY button on the remote, “P-01” will appear and ash on the display, Then
use M+ or M- button on the remote, or touch the PRESET button on the unit to change the
number where the station will be stored. (P01 to P20).
Store the current frequency by pressing MEMORY button on the remote again when you
get the desired number. Repeat the same procedure to set other desired frequencies into
Memory No.1 to No.20. NOTE: The unit can be preset up to 20 stations.
Memory recall
Recall the stored frequencies by pressing M+ or M- BUTTON on the remote, or touch the
PRESET button on the unit to select 1 to 20 stations as desired. NOTE: As stored frequen-
cies can only be stored for long time with the power supplying. The station you stored will
be lost and can not be recalled in case that you cut o the power.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für OneConcept 10021807 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info