Bedienungsanleitung Onkyo A-9010B-S (Seite 5 von 16) (Englisch)

581067

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

En-5

Introduction

Features

Simple circuitry that delivers powerful and faithful

sound quality

The A-9010 is a model designed to deliver the best

performance in sound quality, the most basic element

required for a pre-main amplifier. Using our reliable

discrete amplifier as a core component, the A-9010

incorporates compact circuitry thanks to its simplified

functionality. To minimise the number of switcher

components for the signal paths, the number of speaker

terminal sets is limited to only one. In addition, the

amplifier section for headphones and the one for driving

speakers are separated. The result is a product faithful to

its design concept, which gives the highest priority to the

direct and high-precision delivery of musical energy.

0 Low NFB (negative feedback), high current low

impedance drive design

0 (European models) 70 W/ch (1 kHz, 4 ohms,

0.7 % THD, 2 ch Driven IEC)

0 (North American models) 70 W/ch (1 kHz, 4 ohms,

0.7 % THD, 2 ch Driven FTC)

0 Adopted parts such as aluminum extrusion heatsink,

high grade speaker terminal, etc.

0 Installed direct function that will shorten the signal path

0 (North American and Continental European models)

Equipped with Wolfson 192 kHz/24 bit D/A converter

Supplied accessories

∫ Remote control (RC-902S)

∫ Batteries for remote control (AAA/R03)

In catalogs and on packaging, the letter at the end of the

product name indicates the color. Specifications and operations

are the same regardless of color.

Using the remote control

Remove the cover from the back of the remote control

and insert two AAA/R03 batteries with their i/j ends

oriented in the case as shown. Replace the cover.

0 If the remote control doesn’t work reliably, try replacing

the batteries.

0 Don’t mix new and old batteries or different types of

batteries.

0 If you intend not to use the remote control for a long

time, remove the batteries to prevent damage from

leakage or corrosion.

0 Remove expired batteries as soon as possible to

prevent damage from leakage or corrosion.

When using the remote control, point it toward the remote

control sensor on the unit from a distance of 5 m (approx.

16 ft.) or less.

0 Do not place obstructions between the unit and the

remote control.

0 If another remote control of the same type is used in

the same room, or the unit is installed close to

equipment that uses infrared rays, the remote control

may not work reliably.

0 The remote control may not work reliably if the unit is

subjected to bright light, such as direct sunlight or

inverter-type fluorescent lights. Keep this in mind when

installing.

0 The remote control may not work reliably if the unit is

installed in a rack behind colored glass doors. Keep

this in mind when installing.

Installation

Install horizontally on a sturdy shelf or rack. Do not install

the unit in a place with vibration or an unstable location.

Make sure not to hamper heat dissipation by ensuring

proper ventilation.

Remote control sensor

5 m (approx.

16 ft.) or less

* 20 cm (approx. 8q) or more

10 cm

(approx. 4

q) or more

A-9010_eng.book 5 ページ２０１４年１２月２５日　木曜日　午前１０時４８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo A-9010B-S Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo A-9010B-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info