492684
14
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
14
En
Note
Push plugs in all the way to make good connections (loose connections can cause noise or
malfunctions).
To prevent interference, keep audio cables away from power cords and speaker cables.
The integrated amplifier’s optical digital jack have shutter-type covers that open when an
optical plug is inserted and close when it’s removed. Push plugs in all the way.
To prevent shutter damage, hold the optical plug straight when inserting and removing.
Do not use digital audio signals other than PCM.
*
An analog audio cable can be used instead of a coaxial cable. However, we recommend that
you use a coaxial or a composite video cable.
Tip
To reduce noise, do not tie signal cables together with the power
cable. Wire them so that they are away from each other.
Depending on the country, the integrated amplifier may be
polarity-sensitive. In this case, plug the power cord in a way that
provides the best sound quality.
Note
Never disconnect the power cord from the integrated
amplifier while the other end is still plugged into a wall
outlet. Doing so may cause an electric shock. Always disconnect
the power cord from the wall outlet first, and then the integrated
amplifier.
Turning on the integrated amplifier may cause a momentary
power surge that might interfere with other electrical equipment
on the same circuit. If this is a problem, plug the integrated
amplifier into a different branch circuit.
Do not use a power cord other than the one supplied with the
integrated amplifier. The supplied power cord is designed
exclusively for use with the integrated amplifier and should not
be used with any other equipment.
Cable and Jacks
Optical digital audio
(A-9050 only)
Optical digital connections allow you to enjoy digital sound such as
PCM. The maximum sampling rate for PCM input is 96 kHz/24 bit,
2ch.
Coaxial digital audio
*
(A-9050 only)
Coaxial digital connections allow you to enjoy digital sound such as
PCM. The maximum sampling rate for PCM input is 96 kHz/24 bit,
2ch.
The integrated amplifier provides 75-ohm impedance matching.
Analog audio (RCA) Analog audio connections (RCA) carry analog audio.
u To use u (Remote Interactive), you need to connect your Onkyo
CD Player, Tuner, or u Dock to the integrated amplifier with an
u cable.
Connecting the Power Cord
OPTICAL
Orange
L
R
White
Red
Right!
Wrong!
1
Connect all of your speakers and components.
2
Connect the supplied power cord to the integrated
amplifier’s AC INLET. (A-9050 only)
3
Plug the power cord into an AC wall outlet.
AC INLET
To an AC wall outlet
(Plug type varies from
country to country.)
Supplied power cord
A-9030
A-9050
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo A-9050 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo A-9050

Onkyo A-9050 Bedienungsanleitung - Deutsch, Holländisch - 116 seiten

Onkyo A-9050 Bedienungsanleitung - Französisch - 60 seiten

Onkyo A-9050 Bedienungsanleitung - Italienisch - 116 seiten

Onkyo A-9050 Bedienungsanleitung - Spanisch - 60 seiten

Onkyo A-9050 Bedienungsanleitung - Schwedisch - 116 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info