Bedienungsanleitung Onkyo A-9070 (Seite 41 von 44) (Englisch)

462121

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Others

Troubleshooting

If you have any trouble using the integrated amplifier,

look for a solution in this section.

If you can't resolve the issue yourself, try resetting the

integrated amplifier before contacting your Onkyo dealer.

To reset the integrated amplifier to its factory defaults, see

“Restoring the Default Settings” (➔ page 40).

Can’t turn on the Integrated Amplifier.

• Make sure that the power cord is properly plugged into

the wall outlet (➔ page 16).

• Unplug the power cord from the wall outlet, wait 5

seconds or more, then plug it in again.

The Integrated Amplifier turns off

unexpectedly.

• When the Auto Standby function is activated, the

integrated amplifier will automatically enter Standby

mode (➔ page 38).

• When the protection circuit is activated (because of

speaker short-circuit, overload, or over-current), the

integrated amplifier enters Standby mode. Remove the

source of the problem and turn the integrated amplifier

back on.

There’s no sound.

• Make sure the integrated amplifier’s volume control is

not set to minimum (➔ page 27).

• Make sure the correct input source is selected

(➔ page 28).

• Make sure the integrated amplifier is not muted

(➔ page 31).

• Make sure the speakers are connected correctly

(➔ page 13).

• Check all connections and correct as necessary

(➔ page 13).

• While headphones are connected, the speakers and PRE

OUT output no sound (➔ page 31).

• The integrated amplifier does not support digital formats

other than PCM. Inputting a digital format other than

PCM will cause loud noise.

• If “ROUTE” is set to anything other than “NORMAL”,

make sure that each component is connected accordingly

(➔ page 23 to 25, 39).

The sound quality is not good.

• Make sure the speaker cables are connected with the

correct polarity (➔ page 13).

• Make sure all audio connecting plugs are pushed in all

the way (➔ page 16).

• The sound quality can be affected by strong magnetic

fields, such as those from a TV. Try moving any such

devices away from the integrated amplifier.

• If you have any devices that emit high-intensity radio

waves near the integrated amplifier, such as a cellular

phone that’s being used to make a call, the integrated

amplifier may output noise.

Headphone output is intermittent or there’s

no sound.

• This may be due to dirty contacts. Clean the headphones

plug. See your headphones’ instruction manual for

cleaning information. Also, make sure that the

headphones cable is not broken or damaged.

• Make sure that “ROUTE” is not set to “MAIN”

(➔ page 39).

Audio performance

• Audio performance will be at its best about 10 to 30

minutes after the integrated amplifier has been turned on

and had time to warm up.

• Using cable ties to bundle audio cables with speaker or

power cables may degrade the sound quality, so refrain

from doing it.

• Depending on the country, the integrated amplifier may

be polarity-sensitive. In this case, plug the power cord in

a way that provides the best sound quality.

• Install the integrated amplifier on a sturdy rack or shelf.

Position it so that its weight is evenly dispersed on its

four legs. Do not install the integrated amplifier in a

place with vibration or an unstable location.

• Plug the power cord into an AC wall outlet.

Power

Audio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo A-9070 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo A-9070

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info