Bedienungsanleitung Onkyo BD-SP309 (Seite 40 von 60) (Englisch)

446603

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Audio Video Settings

HDMI Video Out

This sets the resolution of the video output for the

HDMI terminal of this player.

Normally set to “Auto” (factory preset value).

` Item

Auto*, 1080p, 1080i, 720p, 576/480p

NOTE

• When the BD player is connected to a 1080p

24 Hz compatible TV and the “HDMI Video Out”

is set to “Auto”, 1080p 24 Hz will automatically

be displayed when compatible discs are played

back.

Secondary Audio

This toggles the clicking sound on the menu and

audio with secondary video in picture in picture

mode for BD-Video.

• Select “Off” when enjoying the high quality

sounds of BD-Video.

` Item

On*, Off

Audio Out

You can set the audio output when connecting to

SURROUND equipment.

1. This sets the audio output connected to

SURROUND equipment.

` Item

HDMI Output*

Select this when you connect using HDMI

OUT terminal.

Digital Output: Select this when you connect

using DIGITAL AUDIO OUT terminal

(OPTICAL).

2. You can set the audio output mode for each

output terminal.

A This sets the audio output mode for HDMI

OUT terminal when selecting “HDMI Output”.

NOTE

• When the secondary audio is set to “On”, PCM is

automatically selected as the audio output mode.

` Item

Bitstream:

• Select this when connecting to HDMI

equipment with a built-in decoder for

DOLBY DIGITAL, etc.

• Setting to Bitstream will output each audio

signal by Bitstream.

PCM (Surround):

• Select this when connecting to multi-

channel HDMI equipment.

• Setting to PCM (Surround) will output by

LINEAR PCM by decoding audio signals

recorded in each audio output mode such

as DOLBY DIGITAL, DTS.

B This sets the audio output mode for DIGITAL

AUDIO OUT (OPTICAL terminal) when

selecting “Digital Output”.

` Item

Bitstream:

• Select this when connecting to

SURROUND equipment with a built-in

decoder for DOLBY DIGITAL, etc.

• Setting to Bitstream will output each audio

signal by Bitstream.

PCM:

• Select this when connecting to 2 channel

stereo audio equipment.

• Setting to PCM will output by converting

each audio signal into PCM 2 channel

audio signal.

NOTE

• See page 49 for information on output of audio

formats.

Dynamic Range Control

This lets you adjust the range between the loudest

and softest sounds (dynamic range) for playback

at average volume. Use this when it is hard to hear

dialogue.

` Item

Normal: The same audio output range is

played as the original recorded audio output

range.

Shift: When Dolby Digital audio is played

back, the dynamic range of the audio is

adjusted so that the dialogue portion can be

heard easily. (If the audio sounds abnormal,

set to “Normal”.)

Auto*: When you play back audio in the

Dolby TrueHD format, the dynamic range is

automatically adjusted.

* Lower the audio volume before setting. If you do not do so,

the speakers may emit a loud sound or excessive output may

be applied to the speakers.

BD-SP309_EU_En.indb 40 2011/04/28 16:07:00

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP309 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo BD-SP309

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info