Bedienungsanleitung Onkyo BD-SP309 (Seite 52 von 60) (Englisch)

446603

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Ŷ Picture

Problem Possible causes and solutions

No picture. • Make sure that the cable is connected correctly. (Page 15)

• Make sure that the connected TV or the AV receiver is set to the correct

input. (Page 16)

• Take out the disc and clean it. (Page 11)

• Make sure that region code on the disc matches that of this Player.

(Page 7)

• There is no picture from the HDMI output.

- Are the settings performed correctly? Please check the settings.

(Page 40)

Screen freezes and

operation buttons do not

work.

• Turn off the power and turn on the power again.

• If the power is not turned off, perform a reset. (Page 53)

• Is the disc damaged or dirty? Check the condition of the disc. (Page 11)

Square noise (mosaic)

appears on the screen.

• Blocks in images may be visible in scenes with rapid movement due to

the characteristics of digital image compression technology.

Audio is not output, or

images are not played

back properly.

• The audio may not be output or the images may not be played back

properly for some discs in which copyright-protected contents are

recorded.

3D images cannot be

output to a TV.

• Is an HDMI cable used?

• Are a 3D compatible TV and 3D glasses used?

• Is a proper connection made between the HDMI OUT terminal of the

player and the HDMI input terminal of the 3D compatible TV?

• Is the 3D setting on this player correct? (Pages 21, 42)

• Is the 3D setting on the TV correct?

• When a connection to a 3D TV is made via an ampli¿ er/AV receiver, it is

necessary to connect to a 3D compatible ampli¿ er/AV receiver.

• Is a 3D compatible BD disc being played back?

Noise appears on the

screen.

• When you watch TV broadcasts with the power of this player turned on,

noise may appear on the TV screen. In such cases, turn off the power to

this player or keep this player away from the TV.

Ŷ Sound

Problem Possible causes and solutions

No sound, or sound is

distorted.

• If the volume of the TV or ampli¿ er is set to minimum, turn the volume up.

• There is no sound during still mode, slow motion playback, fast forward

and fast reverse. (Page 33)

• Check that the audio cable is connected correctly. (Page 17)

• Check that the cable plugs are clean.

• Take out the disc and clean it. (Page 11)

• Audio may not be output depending on the audio recording status, such

as when audio other than an audio signal or non-standard audio is

recorded for the audio content of the disc. (Page 8)

Audio is not output, or

images are not played

back properly.

• The audio may not be output or the images may not be played back

properly for some discs in which copyrightprotected contents are

recorded.

BD-SP309_EU_En.indb 52 2011/04/28 16:07:08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP309 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo BD-SP309

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info