Bedienungsanleitung Onkyo BD-SP353 (Seite 34 von 312) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

686357

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

• [HDMI Audio]

Select the output mode of HDMI Digital Out

jack, options include Bitstream, PCM,

Reencode and Off.

{Bitstream} – Output HDMI digital signal

without any processing.

{PCM} – Select this to output HDMI audio

signals converted to PCM audio signals.

{Reencode} – When a BD containing

secondary audio and interactive audio is

played, the two audio signals are mixed and

converted to Dolby Digital audio or DTS audio

for output.

{Off} – Select this function when HDMI audio

signals are not used.

• [Max Sampling Frequency]

Select the digital audio signal sampling

frequency.

{48KHz}, {96KHz}, {192KHz} – Outputs audio

signals that are limited to a sampling

frequency below the set sampling frequency

from the Digital Out jack. Select according to

the performance of the connected device.

Note:

• When playing back a sampling frequency

file or a disk having a lower than or equal

setting compared to the present setting,

you can output it at the unchanged

sampling frequency.

• Sources with sampling frequencies of over

192 kHz cannot be played.

• When playing copyright-protected discs or

files, the signals are output with the

sampling frequency limited to 48 kHz or

below, regardless of this setting.

• [DRC]

{Off} – Select this to output audio signals

without using the DRC function.

{On} – Select this to adjust the range between

the loudest and softest sounds (dynamic

range) for playback at average volume. Use

this when it is hard to hear dialog or when

watching movies at midnight.

{Auto} – Select to switch the DRC setting On/

Off automatically according to the input audio

signal from the disc. This only affects Dolby

TrueHD signals.

Note:

• This affects such audio signals as Dolby

Digital, Dolby TrueHD, and Dolby Digital

Plus.

• DRC affects audio signals output from the

following audio output terminals:

– Analog audio signals output from the

ANALOG AUDIO OUT terminals

– Linear PCM audio signals output from

the DIGITAL AUDIO OUT (OPTICAL) or

HDMI OUT terminals

• Depending on the disc, the effect may be

weak.

• The effect may differ depending on the

speakers, the AV amplifier settings, etc.

• [Downmix]

{Stereo}-Surround audio signals converted to

linear PCM audio signals are converted into

2-channel (stereo) signals for output.

{Lt/Rt}-Surround audio signals converted to

linear PCM audio signals are converted into

2-channel signals compatible with Dolby

Surround for output (when the connected AV

receiver or amplier, etc., is compatible with

Dolby Pro Logic, the AV receiver or amplier

outputs the linear PCM audio signals as

surround audio signals).

System Information

1. Press HOME MENU.

[General Setting] menu is displayed.

2. Press ► to select [System

Information].

- The current software version and MAC

address display

- Press ◄ to return to the previous menu.

- Press HOME MENU to exit the menu.

Exit

Use cursor key to move focus, use “Enter” key

to select

Software Version: XXXXXXXXXXXX

MAC:XXXXXXXXXXXX

System Information

Home Menu

License

• When you want to display the license of the

software that you are using in the device,

select “License”.

SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 34 2015/10/20 14:36:35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP353 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info