Bedienungsanleitung Onkyo BD-SP353 (Seite 39 von 312) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

686357

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

Problem Check Remedy

Picture freezes and the

front panel and remote

control buttons stop

working.

• Press b to stop playback, then restart

playback.

• If the playback cannot be stopped,

press z (ON/STANDBY) on the player’s

front panel to turn off the power, then turn

the power back on.

• If the power cannot be turned off (set to

standby), use a thin rod to press the reset

button on the main unit’s front panel.

When the Reset button is pressed, power

to the unit is turned off (standby status).

When the z (ON/STANDBY) button is

pressed to turn on the power, the unit

becomes operational again.

• Picture is stretched.

• Picture is cropped.

• Aspect ratio cannot

be switched.

Is the TV’s aspect ratio properly set? Read the TV’s operating instructions and

set the TV’s aspect ratio properly.

Is TV Aspect Ratio properly set? Set TV Aspect Ratio properly.

When video signals with a resolution of

1080i, 1080p, 1080/24p or 720p are being

output from the HDMI OUT terminal, they

may be output with an aspect ratio of 16:9

even if TV Aspect Ratio is set to 4:3.

Picture is interrupted. The picture may be interrupted when the

resolution of the recorded video signal

switches. Press HDMI to select a setting

other than Auto.

The subtitles cannot

be switched.

The subtitles cannot be switched for

discs recorded on a DVD or BD recorder.

Sound and picture are

not synchronized.

Is Output Terminal properly set? Set Output Terminal properly.

• No sound is output.

• Sound is not output

properly.

Is the disc played back in slow motion?

Is the disc played back in fast

forward or fast reverse?

No sound is output during slow motion

play and forward and reverse scanning.

Are the audio cables properly

connected?

• Connect the cable properly according to

the connected devices (page 15)

• Insert the cable firmly and all the way in.

Is the audio cable damaged? If the cable is damaged, replace it with a

new one.

Are the connected components (AV

receiver or amplifier, etc.) properly

set?

Read the operating instructions of the

connected components and check the

volume, input, speaker settings, etc.

Is HDMI Audio Out properly set? Set HDMI Audio Out to PCM or

Reencode.

Is a DVI device connected?

The sound will not be output from the

HDMI OUT terminal if a DVI device is

connected. Connect the device to a

DIGITAL AUDIO OUT (OPTICAL) terminal

or the ANALOG AUDIO OUT terminals.

For some BDs, audio signals are only output

from DIGITAL AUDIO OUT (OPTICAL)

terminal or the HDMI OUT terminal.

Multi-channel sound is

not output.

Is the audio output of the connected

AV receiver or amplier, etc.,

properly set?

Read the operating instructions of the

connected AV receiver or amplier and

check the audio output settings of AV

receiver or amplier.

Is multi-channel sound selected? Use the menu screen or AUDIO to switch

the disc’s sound to multi-channel.

SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 39 2015/10/20 14:36:36

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP353 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info