Bedienungsanleitung Onkyo BD-SP809 (Seite 4 von 60) (Englisch)

492675

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

12. Region Codes—The Blu-ray Disc™/DVD standard

uses region codes to control how discs can be

played around the world, the world being divided

into three regions (Blu-ray Disc™) or six regions

(DVD). This unit will only play Blu-ray Disc™/

DVD discs that match its region code, which can be

found on its rear panel.

13. About this Manual—This manual explains how to

use all of this unit’s functions. Although the Blu-ray

Disc™/DVD standard offers many special features,

not all discs use them all, so depending on the disc

being played, this unit may not respond to certain

functions. See the disc’s sleeve notes for supported

features.

This unit contains a semiconductor laser system and is

classified as a “CLASS 1 LASER PRODUCT”. So, to

use this model properly, read this Instruction Manual

carefully. In case of any trouble, please contact the store

where you purchased the unit.

To prevent being exposed to the laser beam, do not try

to open the enclosure.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIA-

TION EXPOSURE.

CAUTION: CLASS 2 LASER RADIATION

WHEN OPEN. DO NOT STARE

INTO THE BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHA-

NISM.

The label on the right is

applied on the rear panel.

1. This unit is a CLASS 1

LASER PRODUCT and

employs a laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualified personnel.

For British models

Replacement and mounting of an AC plug on the power

supply cord of this unit should be performed only by

qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance

with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured mark-

ings identifying the terminals in your plug, proceed as

follows:

The wire which is coloured blue must be connected to

the terminal which is marked with the letter N or

coloured black.

The wire which is coloured brown must be connected to

the terminal which is marked with the letter L or

coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse

needs to be replaced, the replacement fuse must

approved by ASTA or BSI to BS1362 and have the same

ampere rating as that indicated on the plug. Check for the

ASTA mark or the BSI mark on the body of the fuse.

If the power cord’s plug is not suitable for your socket

outlets, cut it off and fit a suitable plug. Fit a suitable fuse

in the plug.

For European Models

Declaration of Conformity

We,

ONKYO EUROPE

ELECTRONICS GmbH

LIEGNITZERSTRASSE 6,

82194 GROEBENZELL,

GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

K. MIYAGI

declare in own responsibility, that the ONKYO product

described in this instruction manual is in compliance with the

corresponding technical standards such as EN60065,

EN55013, EN55020 and EN61000-3-2, -3-3.

9GDAAKORQTVCPVA'PHO2CIG6WGUFC[#RTKN2/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP809 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo BD-SP809

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info