Bedienungsanleitung Onkyo BD-SP809 (Seite 44 von 60) (Englisch)

492675

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

11. SETUPS

11.1 Network Connection

[HOME ] Ȼ “Settings” Ȼ “Network” Ȼ “Network Connection”

Set up network connection settings in order to use

BD-Live™, DLNA home media server, or network update

function.

ɶ Connection Test

After you enable a network connection or change the

network settings, always perform the connection test to

check if the connection is correctly made.

1. Use [Î / ï / Í / Æ] to select “Settings” in the home

menu, then press [ENTER].

2. Use [Î / ï] to select “Network”, then press

[ENTER].

3. Use [Î / ï] to select “Network Connection”, then

press [ENTER].

4. Use [Î / ï] to select “Connection Test”, then press

[ENTER].

• Connection test will start automatically and the test

result will appear right after the connection test

finishes.

“Connecting...” : The test is in progress.

“Pass” : Network connection succeeds.

“Failed” : Network connection failed.

5. If the connection test passes, press [ENTER].

D Note

• If the connection test passes, you are ready to use

BD-Live™, DLNA home media server, or network

update function, using the Internet without making any

additional settings.

• If the connection test fails, you may need to check

your router settings and make sure the physical

connection is secure. If you need the MAC address

of this unit to complete your router settings you can

view it on the “Network Status” screen (refer to page

39).

• When connecting this unit directly to a modem for

the first time or connecting it to a modem which was

previously connected to any other network device

(e.g. a router, PC, etc.), you may have to power cycle

the modem to reset the settings on the modem.

ɶ Auto

Select “Auto” to set the network setting automatically.

1. Follow steps 1 to 3 in “Connection Test” on page 40.

2. Use [Î / ï] to select “Start”, then press [ENTER].

3. Use

[Î / ï]

to select “

Auto

”, then press

[ENTER]

• The unit will start the connection test automatically

and the test result will appear right after the test

finishes.

4. The network setting is completed. Select “End”.

ɶ Manual

In the following cases, select “Manual” to set each setting

as necessary.

– When connection test failed with the setting of

“Auto”.

– When instructed by your Internet service provider

to make specific settings in accordance with your

network environment.

1. Follow steps 1 to 2 in

“

Auto

”

on page 40.

2. Use

[Î / ï]

to select “Manual”, then press

[ENTER]

3. Use [Î / ï] to select “IP Address”, then press

[ENTER].

4. IP address setting screen will appear. Enter IP address

with cursor buttons and number buttons.

Cancel

ancel

Network Settings (Manual)

IP Address

Please enter the IP Address.

Back

Clear OK

• Enter the IP address after checking the

specifications of your router.

• If the IP address is unknown, check the IP address

of other devices. (e.g. PC connected via LAN cable)

and assign a different number from those of other

devices.

5. Use [Î / ï / Í / Æ] to select “OK”, then press

[ENTER].

E5XB0_2ED_EN_Book.indb 40E5XB0_2ED_EN_Book.indb 40 2011/04/30 14:18:052011/04/30 14:18:05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP809 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo BD-SP809

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info