Bedienungsanleitung Onkyo BD-SP809S (Seite 43 von 56) (Englisch)

577596

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

11.3 HDMI Output

[HOME ] → “Settings” → “HDMI” → “HDMI Output”

You can set the video and audio output settings from

HDMI OUT MAIN and SUB jacks.

“Main”

Outputs both of video and audio signals from

HDMI OUT MAIN jack only.

“Dual (Main and Sub)”

Outputs video and audio signals from both of

HDMI OUT MAIN and HDMI OUT SUB jacks.

“AV Split (Main:V, Sub:A)”

Outputs video signals from HDMI OUT MAIN jack and

audio signals from HDMI OUT SUB jack.

D Note

• To enable “HDMI Output”, it is necessary that both

HDMI OUT MAIN and HDMI OUT SUB jacks are

connected with other HDMI devices and this unit

should obtain EDID (Extended Display Identification

Data).

• When “HDMI Output” is set to “Main”, there will be

no output from the HDMI OUT SUB jack.

• HDMI video resolution will normally be as selected in

“Video Resolution” except when “HDMI Output” is

set to “Dual (Main and Sub)” and “Video Resolution”

is set to “Source Direct” or “Auto”. When the

unit is set to these settings video and audio from

HDMI OUT MAIN and SUB jacks will be the same by

EDID.

• When playing 3D contents with the unit set to

“AV Split (Main:V, Sub:A)”, a compatible display device

and AV receiver/amplifier must be connected to the

unit. Without a compatible device audio output will

not occur.

• When set to “HDMI Output”, unplugging the

HDMI OUT MAIN or HDMI OUT SUB jack will clear

settings.

• Only remove HDMI cables when this unit is in standby

mode. Do not unplug cables when outputting video

and audio signals from HDMI OUT MAIN and SUB

jacks.

• The video output from HDMI OUT SUB jack and

the video output which “HDMI Output” is set to

“Dual (Main and Sub)” are not THX certified.

11.4 Video Resolution

[HOME ] → “Settings” → “HDMI” → “Video Resolution”

Set the resolution of the video signal being output from

the HDMI OUT jack.

You can select the desired “Video Resolution” among the

settings listed below:

“Auto”, “480i/576i”, “480p/576p”, “720p”, “1080i”,

“1080p”, “1080p/24”, “Source Direct”.

Actual Output Resolution by Media:

Setting in the

“Video Resolution”

Source

480i/60

576i/60

720p/60 1080i/60 720p/24 1080p/24

480i/576i

480i/60

576i/60

480p/576p

480p/60

576p/60

720p 720p/60

1080i 1080i/60

1080p 1080p/60

1080p/24 1080p/60

1080p/24

Source Direct

HDMI video resolution will be set to the

recorded resolution of a playback media.

Auto

The highest or recommended resolution

supported by your display device will be in

effect automatically. “Auto” is affected by the

“HDMI Auto Format” setting.

The table below describes the available output resolution

when “Video Resolution” is set to “Source Direct”.

Media

Source

480i/

576i

480p/

576p

720p 1080i 1080p

1080p24

BD-video ΟΟΟΟΟΟ

AVCHD ΟΟΟΟΟ –

DVD-video Ο –––––

JPEG – ΟΟ – Ο –

: available – : not exist

• Composite video output (VIDEO) jack can only output

480i/576i.

• For AVCHD, outputting the video in 24 frames per

second (1080p/24) is not available.

• Even if “Video Resolution” is set to “Source Direct”,

HDMI video resolution will be changed when your TV

is not compatible with the video resolution of a disc

material.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP809S Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo BD-SP809S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info