Bedienungsanleitung Onkyo C-733 (Seite 14 von 16) (Englisch)

492686

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Troubleshooting

If you have any trouble using the C-733, look for a solution here. If you can’t resolve the issue yourself, contact your

Onkyo dealer.

Can’t turn on the C-733.

• Make sure that the power cord is properly plugged into the wall outlet (page 9).

• Unplug the power cord from the wall outlet, wait ﬁve seconds or more, then plug it in again.

There’s no sound.

• The C-733 is not connected properly. Check all connections and correct as necessary.

• The wrong input source is selected on your ampliﬁer. Check your ampliﬁer’s input source setting. Refer to your

ampliﬁer’s manual.

• Check if the A-933’s MAIN IN function is on. Refer to the A-933’s instruction manual.

Can’t play a CD.

• The disc is upside down. Load the disc with the label-side facing up (page 10).

• The disc is dirty. Remove the disc and clean it (page 13).

• Condensation has formed inside the C-733. Remove the disc and leave the C-733 turned on for several hours until the

condensation has evaporated.

• The disc is nonstandard. See “Supported Discs” on page 13.

CD playback skips.

• Install the C-733 somewhere free of vibration.

• The disc is dirty. Remove the disc and clean it (page 13).

• The disc is very scratched. Replace the disc.

Can’t enter track numbers for memory playback.

• No such track on the CD. Enter another number (page 12).

Can’t start or stop memory playback.

• Random playback is on. Press the [RANDOM] button to cancel random playback before starting or stopping memory

playback.

It takes a long time to locate certain tracks.

• The disc is dirty. Remove the disc and clean it (page 13).

• The disc is very scratched. Replace the disc.

The A-933’s remote controller doesn’t work.

• Point the remote controller at the A-933’s remote sensor (page 7).

•You’ve made an connection but not an analog audio connection. To use , you must make an connection and

an analog audio connection between the A-933 and C-733 (page 9).

• Check if the A-933’s MAIN IN function is on. Refer to the A-933’s instruction manual.

Power

Audio

Remote Controller

The C-733 contains a microcomputer for signal processing and control functions. In very rare

situations, severe interference, noise from an external source, or static electricity may cause it to

lockup. In the unlikely event that this should happen, unplug the power cord, wait at least ﬁve

seconds, and then plug it again.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings

caused by the unit’s malfunction. Before you record important data, make sure that the material

will be recorded correctly.

*En_C733_02.fm Page 14 Wednesday, December 22, 2004 3:07 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo C-733 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo C-733

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info