Bedienungsanleitung Onkyo C-N7050S (Seite 23 von 36) (Englisch)

577606

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Settings

Follow the procedures below to open the menu and

change settings.

1. Press the MENU button.

⿠

You can also press and hold the MENU/ENTER

dial on the main unit to do this.

2. Use the direction (

) buttons to select the setting

you want to change.

Press a direction (

) button repeatedly to cycle

through the settings in the following order.

When the input source is CD:

MP3 Setting

Asb(Auto Standby) Net Setting

Update

When the input source is USB:

Asb(Auto Standby)

M.OPT Audio Output

Update

When the input source is NET:

Net Setting

Update Asb(Auto Standby)

M.OPT Audio Output

⿠

The setting shown first depends on the current

source

⿠

You can also turn the MENU/ENTER (

/ ) dial

on the main unit to do this.

3. Press the ENTER button.

⿠

You can also press the MENU/ENTER dial on the

main unit to do this.

After opening “MP3 setting” or “NET Setting”,

repeat steps 2 and 1 to make a selection in the

submenu.

⿠

You must wait at least one minute after turning the

unit on to select and change the “NET Setting” and

“Update” items.

4. Use the arrow (

) buttons to change setting values.

⿠

You can also turn the MENU/ENTER dial on the

main unit to do this.

5. Press the ENTER button to confirm the change.

⿠

You can also press the MENU/ENTER dial on the

main unit to do this.

6. After you complete making settings, press the

RETURN button to close the menu screen.

⿠

When you press the RETURN button while viewing

the “NET Setting” submenu, “Network Save?”

will appear. Press the ENTER button to save the

settings. If you press the RETURN button, the

menu screen will close without saving the setting

changes.

MP3 Setting

You can set how MP3/WAV file information is shown and

how MP3/WAV discs are played back, for example.

These settings can only be changed when the disc is

stopped.

 BAD NAME

Set how MP3/WAV file information is shown.

⿠

Regardless of the setting, characters that cannot

be shown in ID3 tag information are replaced with

asterisks (Ú).

Replace: If a track or folder name contains a

character that cannot be shown, “File_n” or “Folder_n”

(with “n” being the track/folder number) will be shown

instead.

Not (default setting): Characters that can be shown

are shown and characters that cannot be shown are

replaced with asterisks (Ú).

 ID3 VER.1

Set how ID3 Version 1.0/1.1 tag information is shown.

Read (default setting): The unit will load tag

information and show it.

Not Read: Tag information will not be shown.

 ID3 VER.2

Set how ID3 Version 2.2/2.3/2.4 tag information is shown.

Read (default setting): The unit will load tag

information and show it.

Not Read: Tag information will not be shown.

 HIDE NUMBER

The unit can hide numbers that are attached to the

beginnings of track and folder names.

Disable (default setting): Such numbers will be

shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo C-N7050S Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo C-N7050S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info