601381
46
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
En-46
Setting the Clock—Continued
Displaying the Day and Time
To display the day and time, press the remote controller’s
[DISPLAY] button for 2 seconds. The day and time will
be displayed continuously.
To cancel the time display, press the [DISPLAY] button
again.
If the CBX-500/CBX-600UKD is on Standby, pressing
the [DISPLAY] button will display the day and time for
8 seconds.
If for some reason the AccuClock function doesn’t set
the clock correctly, you can specify which FM station the
AccuClock function uses. This is especially useful if you
live close to a country’s border where stations from dif-
ferent time zones can be received. Note that the FM sta-
tion must support RDS CT (Clock Time) information.
1
Press the [TIMER] button repeatedly until
“Clock” appears.
2
Press [ENTER].
3
Use the Up/Down []/[] buttons to select
“AccuClock”.
4
Press [ENTER].
The frequency of a station that the unit has previ-
ously searched for may appear on the display.
5
Use the TUNING []/[] buttons to specify
the frequency of a station thats broadcast-
ing RDS CT information.
6
Press [ENTER].
The specified frequency will be used the next time
the AccuClock function runs.
If the specified station is not broadcasting RDS,
“Not RDS” will be displayed and it will not be pos-
sible to set the clock.
To run the AccuClock function now, press
the [MODE] button.
The unit enters Standby mode, and “AccuClock…”
appears dimly on the display while the AccuClock
function attempts to set the clock.
If the clock is set successfully, the day and time
will be displayed brightly for 2 seconds, as shown.
Notes:
Once the AccuClock function is working, it will auto-
matically update the clock daily at 2, 3, and 14, but
only when the unit is on Standby.
If you’ve set the AccuClock function, but it’s not
updating the time automatically, make sure a strong
signal is being received from the specified RDS sta-
tion. Also make sure that the station is actually broad-
casting CT information. Try another station, if
necessary.
AccuClock with a Specific Station
(CBX-500 European model and
CBX-600UKD)
TIMER
ENTER
MODE
,
TUNING ,
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo CBX-600 UKD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info