Bedienungsanleitung Onkyo CR-N1 (Seite 6 von 64) (Englisch)

492696

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Declaration of Conformity

We,

ONKYO EUROPE

ELECTRONICS GmbH

INDUSTRIESTRASSE 20

82110 GERMERING,

GERMANY

GERMERING, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

I. MORI

declare in own responsibility, that the ONKYO product described

in this instruction manual is in compliance with the corresponding

technical standards such as EN60065, EN55013, EN55020 and

EN61000-3-2, -3-3.

Precautions

For European model

This unit contains a semiconductor laser sys-

tem and is classiﬁed as a “CLASS 1 LASER

PRODUCT”. So, to use this model properly,

read this Instruction Manual carefully. In case

of any trouble, please contact the store

where you purchased the unit.

To prevent being exposed to the laser beam,

do not try to open the enclosure.

This label on the rear panel states that:

1. This unit is a CLASS 1 LASER PRODUCT and

employs a laser inside the cabinet.

2. To prevent the laser from being exposed,

do not remove the cover. Refer servicing

to qualiﬁed personnel.

For British model

Replacement and mounting of an AC plug on

the power supply cord of this unit should be

performed only by qualiﬁed service personnel.

IMPORTANT

The wires in the mains lead are coloured in

accordance with the following code:

Blue : Neutral

Brown : Live

As the colours of the wires in the mains lead

of this apparatus may not correspond with

the coloured markings identifying the termi-

nals in your plug, proceed as follows:

The wire which is coloured blue must be con-

nected to the terminal which is marked with

the letter N or coloured black.

The wire which is coloured brown must be

connected to the terminal which is marked

with the letter L or coloured red.

IMPORTANT

A 5 ampere fuse is ﬁtted in this plug. Should

the fuse need to be replaced, please ensure

that the replacement fuse has a rating of 5

amperes and that it is approved by ASTA or

BSI to BS1362. Check for the ASTA mark or

the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE

FOR THE SOCKET OUTLET IN YOUR HOME

THEN THE FUSE SHOULD BE REMOVED AND

THE PLUG CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL

SHOCK IF THE CUT OFF PLUG IS INSERTED

INTO ANY 13 AMPERE SOCKET.

If in any doubt, please consult a qualiﬁed

electrician.

Trademarks

Apple, Mac, Power Macintosh, and Power-

Book are registered trademarks and iBook

and iMac are trademarks of Apple Corpora-

tion, Inc. Microsoft and Windows are regis-

tered trademarks of Microsoft Corporation,

Inc.

Memory backup

The CR-N1 uses a special battery-less memory

backup system in order to retain the radio

presets and other settings when it’s

unplugged or in the case of a power failure.

Although no batteries are required, the

CR-N1 must have been plugged in in order to

charge the backup system. Once it has been

charged, the CR-N1 will retain its settings for

several weeks, although this depends on the

environment and will be shorter in humid cli-

mates.

“CLASS 1 LASER

PRODUCT”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo CR-N1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info