Bedienungsanleitung Onkyo CR-N755 (Seite 41 von 48) (Englisch)

492677

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Troubleshooting

If you have any trouble using the CD receiver, look for a solution in this section.

Can’t turn on the CD receiver.

• Make sure that the power cord is properly plugged into the wall outlet (see page 16).

• Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.

The CD receiver turns off unexpectedly.

• The CD receiver will automatically enter standby mode when Auto Standby has been set and launches.

There’s no sound.

• Make sure the correct input source is selected (see page 17).

• Make sure the CD receiver is not muted (see page 18).

• Make sure the speakers are connected correctly (see page 15).

• Check all connections and correct as necessary (see pages 14 to 16).

• While headphones are connected, the speakers output no sound (see page 18).

The sound quality is not good.

• Make sure the speaker cables are connected with the correct polarity (see page 15).

• Make sure all audio connecting plugs are pushed in all the way (see page 15).

• The sound quality can be affected by strong magnetic fields, such as that from a TV. Try moving any such devices

away from the CD receiver.

• If you have any devices that emit high-intensity radio waves near the CD receiver, such as a cellular phone that’s being

used to make a call, the CD receiver may output noise.

• The CD receiver’s precision drive mechanism may emit a faint hissing sound while reading discs during playback or

when searching for tracks. You may be able to hear this noise in extremely quiet environments.

Audio output is intermittent when the CD receiver is subjected to vibration.

• The CD receiver is not a portable device. Use it in a location that’s not subject to shock or vibration.

Headphone output is intermittent or there’s no sound.

• This may be due to dirty contacts. Clean the headphones plug. See your headphones’ instruction manual for cleaning

information. Also, make sure that the headphones cable is not broken or damaged.

Audio performance

• Audio performance will be at its best about 10 to 30 minutes after the CD receiver has been turned on and had time

to warm up.

• Using cable ties to bundle audio cables with speaker or power cables may degrade the sound quality, so don’t do it.

If you can’t resolve the issue yourself, try resetting the CD receiver before contacting your Onkyo dealer.

Note that resetting the CD receiver will delete your radio presets and custom settings.

To reset the CD receiver to its factory defaults, turn it on and, while holding down the Stop [2] button, press

the [

8ON/STANDBY] button.

“Clear” will appear on the display and the CD receiver will enter Standby mode.

HOLD

Power

Audio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo CR-N755 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo CR-N755

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info