Bedienungsanleitung Onkyo CR-N765 (Seite 34 von 44) (Englisch)

601922

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Various settings

∫ Updating the firmware via network

You can update the firmware by connecting the unit to a

network.

Update procedures

1. Press the MENU button.

2. Use the direction ( / ) buttons to select “Update”

and press the ENTER button.

0 Wait for a while if “Not Available” is displayed and

“Update” cannot be selected.

3. Use the direction ( / ) buttons to select “CR via

NET?” and press the ENTER button.

0 The option does not appear when no firmware

update is available.

4. Select “UpdateStart?” and press the ENTER button.

Updating starts.

5. “Completed” appears on the display when updating is

completed.

6. Press the Í ON/STANDBY button on the front panel

to put the unit into standby.

0 Do not use the Í button on the remote control for

this operation.

0 If you do nothing for three minutes, the unit will

enter standby automatically.

The update is complete. The unit’s firmware has been

updated to the latest version.

When an error message appears

When an error occurs, “Error!! *-**” or an error message

appears on the display of this unit. (Letters and numbers

appear in place of the asterisks.) Refer to the descriptions

below to check the meaning.

Error code

*-10, *-20: The LAN cable could not be recognized.

Connect the LAN cable properly.

*-11,*-13,*-21,*-28: Internet connection could not be

established. Check the following points.

0 Confirm that the IP address, subnet mask, gateway

address and DNS server setting are correct.

0 Confirm that the router is turned on.

0 Confirm that the unit and router are connected with

a LAN cable.

0 Check the router setting. For the setting, see the

instruction manual of the router.

0 This unit may fail in network connection if your

network environment does not allow multiple device

connections. Consult your Internet service provider

(ISP).

0 You need a router separately if your modem does

not have the router function. Depending on your

network connection environment, you need to

configure the proxy server. For information on the

configuration, consult the document provided by

your carrier or ISP provider.

0 If you still cannot connect to the Internet, the DNS

server or proxy server may be temporarily down.

Check the service status with your ISP provider.

Others: Disconnect and reconnect the power cord,

and retry updating.

∫ Updating the firmware via USB connection

Use the USB port to update the firmware.

0 You need a 32 MB or larger capacity USB flash drive

for updating.

Update procedures

1. Connect a USB flash drive to the PC that you are using

and delete any files on it.

2. Download the firmware file to the PC from our website.

Decompress the downloaded file on the PC.

0 Do not change the names of the decompressed

files.

3. Copy the decompressed files to the root folder of the

USB flash drive.

0 Do not copy any files other than the decompressed

files. Do not copy the compressed file.

4. Confirm that this unit is on.

5. Connect the USB flash drive with the decompressed

files to the USB port.

6. Press the USB button repeatedly to select the port to

which the USB flash drive is connected from “USB(F)”

(front panel) and “USB(R)” (rear panel).

Precautions when updating the firmware

0 Confirm that the unit is on and connected to a

network.

0 While updating, never disconnect or turn off this

unit.

0 While updating, never disconnect and reconnect

the LAN cable.

0 While updating, never disconnect and reconnect

the power cord.

0 Do not access this unit from a PC while updating.

0 Updating takes about five minutes to be

completed.

0 Settings you made are retained after updating.

0 Before starting an update, stop the Internet radio,

iPod/iPhone, USB device, server or any other

device that is playing audio.

Precautions when updating the firmware

0 Before updating, stop playback and disconnect

anything connected to the USB ports.

0 While updating, never put the unit into standby

mode, or disconnect the power cord or the USB

flash drive being used for the update.

0 Do not access this unit from a PC while updating.

0 Updating takes about five minutes to be

completed.

0 Settings you made are retained after updating.

CR-N765_eng.book 34 ページ２０１５年３月２５日　水曜日　午後５時５２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo CR-N765 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo CR-N765

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info