Bedienungsanleitung Onkyo CS-255 (Seite 25 von 32) (Englisch)

549884

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Using the Timer

The CD receiver has a programmable timer for

automated playback, and a sleep timer for turning the

CD receiver off after a specified period.

You can also use the alarm playback function of your

iPod to initiate timer playback on the CD receiver.

The timer can be used to start FM, CD, iPod/USB, or

LINE playback at a specified time. You could, for

example, use a timer to turn on the CD receiver every

morning, just like a radio alarm clock.

Note:

• If iPod is selected as the input source for the timer

settings, USB will play if only a USB flash drive is

connected, and iPod/iPhone will play if an iPod/

iPhone is connected.

• When connecting an iPod/iPhone to the iPod dock and

the USB port respectively, the iPod/iPhone connected

to the iPod dock will be selected as a priority and the

iPod/iPhone connected to the USB port with the USB

cable cannot be played.

Note:

• You must set the clock before you can program the

timer.

• When the CD receiver is turned on by the timer,

playback will begin with the most recently received

station in the case of FM, the first song in the case of

a CD or iPod/USB, and the current state of the

connected device in the case of LINE.

• Only one timer can be set.

Prepare the source that you want the timer

to play.

If you want FM to play, tune to the station you

want to hear.

If you want a CD to play, insert the disc.

If you’re using a USB flash drive rather than an

iPod/iPhone, disconnect the iPod/iPhone from the

iPod dock (see page 20).

If you want to play a device connected to LINE,

make settings on the connected device so that it

will start playing when the timer operates.

Press the [TIMER] button repeatedly until

“Timer XX” appears.

“XX” indicates the source that was last selected for

timer playback.

If you don’t operate any buttons for about 5

seconds, the procedure will be cancelled and the

previous display will reappear.

Use the arrow [q]/[w] buttons to select the

source, and then press [ENTER].

You can select the following sources:

FM, CD, iPod/USB, LINE.

In the display, “TIMER” and a number indication

will blink according to the input source you’ve

selected.

The number will be “1” for FM, “2” for CD, “3”

for iPod/USB, and “4” for LINE.

If you don’t operate any buttons for about 5

seconds, the procedure will be cancelled and the

previous display will reappear.

Use the arrow [q]/[w] buttons to specify the

hour at which you want the timer to play,

and then press [ENTER].

Use the arrow [q]/[w] buttons to specify the

minute at which you want to timer to play,

and then press [ENTER].

Use the arrow [q]/[w] buttons to select

“Timer On”.

When a timer is turned on, its “TIMER” and

number appears on the display.

If there is no operation for several seconds, the

setting will be made with the currently-shown

content.

The display will return to its previous state except

for “TIMER” and the number of the selected input

source; the timer is now set.

Press the On/Standby [8] button to set the

CD receiver to Standby.

Tip:

• If you decide to cancel during this procedure without

making timer settings, press the [TIMER] button.

• By pressing the [DISPLAY] button when specifying

the time, you can switch between 12-hour and 24-hour

displays.

Note:

• Be sure to set the CD receiver to Standby, otherwise

the timed operation will not work.

If the timer has been set, timed operation will work

even if the SLEEP timer caused the CD receiver to

enter Standby mode.

Once the timer has been turned on, playback will start

at the same time every day. Be sure to turn off the

timer before leaving on vacation.

• If the timer turns the power on, the “SLEEP”

indication will light. If no operation is performed for

one hour, the CD receiver will automatically enter

Standby mode. If you perform any operation, the

“SLEEP” indication will turn off, and the CD receiver

will continue operating.

This section describes the procedure for using the

remote controller, unless otherwise specified.

Programming the Timer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo CS-255 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo CS-255

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info