Bedienungsanleitung Onkyo dr 90 (Seite 30 von 68) (Englisch)

370695

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Enjoying the Sound Effects

The surround sound of the DVD Receiver enables you to enjoy the presence of a movie theater or concert hall in your room.

Before using any sound effect, make sure the Speaker Setup configurations have been set (see page 18).

The speaker configuration is very important for the surround sound. See "Connecting Speakers" on page 12 and "Positioning

Speakers" on page 13.

Following are the sound systems the DVD Receiver can reproduce.

Right surround speakerLeft surround speaker

Right front speaker

Center Speaker

Left front speaker

DOLBY PRO LOGIC Surround

This surround format consists of four channels (left and right

front, center, and monaural surround channel) and

emphasizes the center channel. This format is very effective

for panning music, conversation, and three-dimensional

sound movement output from three front channels. It also

simulates the atmosphere and surround effects of the sound

reflected from the side and rear walls of the theater. Select

this option when you play a VHS, VHS Hi-Fi, laser disc, or

DVD video that has the

mark.

Onkyo's original sound effects

–DSP (Digital Signal Processor)

The DVD Receiver offers the following special Onkyo sound

effects for sources other than Dolby Digital and DTS sounds.

ORCHESTRA

This mode is suitable for classical and opera music. The

center channel is cut and the surround channels are

emphasized to widen the stereo image. It will simulate a

natural reverberation as created in a large hall.

UNPLUGGED

This mode is suitable for acoustic instrumental sounds,

vocals, and jazz music. By emphasizing the front stereo

image, it simulates the acoustics in front of the stage.

STUDIO-MIX

This mode is suitable for rock and popular music. Lively

sounds with a powerful acoustic image will make you feel as

if you are in a club.

TV LOGIC

This mode offers a realistic acoustics of a TV program being

aired in the TV studio. It enhances the entire surround sound

and clarity of conversation.

5CH STEREO

This mode is useful for background music. The front and

surround channels will create a stereo image.

DOLBY DIGITAL Surround and DTS (Digital

Theater System) Surround

Minimum required speaker system

This 5.1-channel digital surround format enables you to

individually record and play five full-range (20Hz-20kHz)

channels (left and right front, center, two surround channels)

plus an LFE channel (Low Frequency Effect) for the low-

range effect sound. It will create a realistic sound that can be

heard in the theaters and concert halls.

DOLBY DIGITAL Surround

Select this option when you play a DVD video that has the

DIGITAL

mark.

DTS Surround

Select this option when you play a DVD video, laser disc, or

CD that has the

mark. To playback DTS Surround sound

with the connected equipment such as a video disc player,

the digital connection is a must in addition to the above

speaker configuration.

Notes on DTS Surround

• If you play a DTS Surround encoded disc with the DVD Receiver,

or a DTS encoded disc using the digitally connected player, you

may hear a noise for a short while until the DTS decoder of the

DVD Receiver recognizes the DTS encoded signal and starts

operating. This is not a malfunction.

• If you pause, or skip a chapter or track, while playing a DTS

Surround source, a short noise may be heard. This is not a

malfunction.

• Even when playback of the DTS Surround source stops and the

DTS signal transmission ends, the DVD Receiver remains in DTS

mode and the DTS indicator remains lit. This is to prevent noise

when you pause, fast forward, fast reverse, or skip a chapter or

track of the playback source. Therefore, if the source switches from

the DTS signal to a PCM (2 channel digital stereo) signal

immediately, the PCM signal may not be played. In such a case,

stop playback for about three seconds, then resume playback.

• Some CD players (if connected to the DVD Receiver) and video

disc players may be unable to play DTS Surround sources

correctly even if you connect the player to the DVD Receiver

digitally. In such a case, the digital signals (such as the output

level, sampling frequency, frequency response, etc.) processed by

the player cannot be recognized as DTS data by the DVD Receiver

and you may hear noise instead of the proper sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dr 90 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info