Bedienungsanleitung Onkyo dr l 50 (Seite 38 von 88) (Englisch)

371103

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Naming a Preset Station

You can name the preset stations so that the name, instead

of the frequency, appears on the display when you select the

station. The following 54 characters can be used:

_ABCDEFGHIJKLMNOPQUSTUVWXYZ” ’&()[ ]*+,-./

=?0123456789

Note

You cannot enter characters for an RDS station that has a program

service (PS) name, since the PS name has priority over other

character information (For more information on RDS stations, see

page 39).

• RDS reception is available only on the European models.

Listening to the Radio

FM Auto Preset Memory

This function enables you to store the frequencies into

memory automatically, without having to go through and

store each frequency manually.

Hold down the PRESET MEMORY

button for a few seconds. “AUTO

MEM” will start flashing on the

display. Keep holding down the

button for a few more seconds to

start the Auto Memory function.

The frequencies are scanned from low to high.

Up to 20 FM stations with the best signal

quality are selected, sorted in order from low to

high frequency, and stored into the preset

memory. Even if you have already preset more

than 10 AM stations, you can only store up to

30 AM/FM stations total.

Note

All FM stations previously stored in memory will be replaced with

new Auto Memory stations.

DISPLAY

Theater-Dimensional

PROGRESSIVE SCAN

IPM

PRESET MEMORY

TV/

SETUPTV/

SETUP

TEST TONESP SETUP CH SEL

DISTANCESW MODE UP

TV MUTING

POWER

INPUT

D SETUPIPM DOWN

TV VOL

TV CH

VOLUME

STANDBY

INPUT SELECTOR

RECEIVER

COND.MLAST M FUNC.M

ANGLEAUDIO SUBTITLE

STLATE NIGHT

TOP MENU MENU

RETURN

DVD

SETUP

REPEAT

TUNING TUNER PRESET

CDR

TAPE

B STEP/

SLOW

TIMER

CLEAR

PROGRAM

ACOUSTIC

CONTROL

SURROUND

RANDOM

---

MODE

SLEEP

MUTING

DIMMER DISPLAY CLOCK

MODE

10 0

SHIFT

456

123

CURSOR 5/∞

DISPLAY

Hold down

Select the station you wish to

name.

See “Selecting preset stations” on page 39.

Press the DISPLAY button on the

remote controller for at least 2

seconds.

The DVD Receiver enters character input

mode, “NAME IN” appears on the display, then

“.....” flashes on the display.

Use the Cursor 5/∞ buttons to

select a character and press the

ENTER button to store the

character.

Flashing “.....” mark appears next to the stored

character.

Repeat step 3 to store more characters. You

can enter characters in any positon by moving

the cursor with the Cursor 2/3 button. You can

store up to 8 characters.

When 8 characters have been entered,

“COMPLETE” appears on the display. To enter

less than 8 characters, press ENTER

repeatedly to move the cursor to the end, or

hold down the DISPLAY button for more than 2

seconds.

Tip

To change an entered name, follow the steps above. In step 3, use

the Left/Right Cursor buttons 2/3 to select the name you want to

change. Change the letters of the name one at a time. To delete a

letter, select the blank space (_). You cannot delete the whole name

at once.

Before operating the

remote controller

Press MODE RECEIVER.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dr l 50 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info