Bedienungsanleitung Onkyo dr s 2 2 (Seite 57 von 88) (Englisch)

371088

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

2/3/5/∞

ENTER

CLEARPROGRAM

Exit

Move

Current:

Title

Program Memory On

Chapter

(Chapter 1~18)

Program Chapter Program Title

Off

PROGRAMENTER

Select

A program with a maximum of 24 steps can be memorized.

Press PROGRAM.

The program screen appears. When a

Video CD or CD is loaded, the cursor

appears in the program window.

Exit

Move

Play

Current:

Track

Total Time

1(/10)

0.00

Program Track

PROGRAMENTER

Use the number buttons to enter the

numbers of the tracks in the order

you want to program them in.

• To program tracks 9, 7, and 18 in order,

press 9, 7, +10 and 8.

• To edit the program, refer to the

procedures on the previous page.

• To program a pause in a program, press

8 instead of a number button.

“8” appears on the screen and the

pause can be programmed.

A pause cannot be programmed as the

first or last position in a program, and

two or more pauses cannot be

programmed in succession.

Press ENTER or £.

• Playback starts in the specified track

order.

• Press PROGRAM to return to the

previous display. The program play will

not begin until £ is pressed.

• To stop the program play, press 7.

Notes

• To program a pause, or to add or delete a number, refer to the

procedures for “Programming DVDs” on page 56.

• You cannot program when playing a Video CD using menu

selections (during PBC).

Programming Video CDs, CDs

VCD

Number

buttons

Before operating the

remote controller

Press MODE DVD.

Notes

• When programming chapters, chapters not programmed may

appear on the screen. This is not a malfunction.

• Programming may not be possible with certain DVDs. On these

types of discs, the

mark will appear on the screen when

programming is attempted.

• Only chapters within the same title can be programmed during

chapter programming.

■ To save a program in memory

This DVD Receiver can memorize the programs on up to 24 DVDs.

By turning the [Program Memory] to [On], the DVD Receiver will save

your program and recall it the next time you use the same DVD.

When the program memory exceeds 24, programs will be erased in

chronological order from the oldest program in memory.

1 Use the cursor button (∞) to highlight [Program Memory]

and use the cursor button (3) to select [On].

2 Press ENTER.

The program is saved in memory.

Note

When a DVD with a program stored in memory is loaded, program

playback may start automatically.

■ To erase a program saved in memory

The player erases programs in chronological order when the

maximum number of programs that can be held in memory is

exceeded. To prevent the player from erasing older programs that

you may still use regularly, or when you don’t want to use a program

anymore, it is possible to manually erase programs stored in

memory.

1 Load a DVD that has a program stored in memory.

2 Press PROGRAM.

The program screen appears.

3 Use the cursor button (∞) to highlight [Program Memory]

and use the cursor buttons (3/∞) to select [Off].

4 Press ENTER.

The program is cleared from memory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dr s 2 2 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info