Bedienungsanleitung Onkyo dr s 2 2 (Seite 82 von 88) (Englisch)

371088

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Notes:

• The remote controller codes for Onkyo CD player, MD player,

cassette tape deck or HD Recorder have already been

programmed into buttons on the remote controller. You may,

however, use these buttons to program the codes for other

remote controllers. If you wish to restore the Onkyo preset codes

after you program new codes, you must first erase the new codes

(see page 83).

• The remote controller has 300 memory slots (6 modes × 50

buttons). Some remote controllers may have more commands

that can be remembered by the remote controller. In such cases,

it will be necessary for you to determine which commands are

more important than others.

• If no button is pressed for more than 30 seconds during the

programming, or if you perform an invalid operation during

programming, the SEND/LEARN indicator flashes three times

quickly, and the remote controller exits the programming mode.

Resume from Step 2.

• If a failure occurs during programming, the SEND/LEARN

indicator flashes three times quickly, and the remote controller

exits the programming mode. Resume from Step 3.

• If a failure occurs five times in row during programming, the

remote controller exits the programming mode. Resume from

Step 3.

• If you try to program beyond the learning capacity of the remote

controller, the SEND/LEARN indicator flashes six times quickly,

and the remote controller exits the programming mode. Try

programming under a different MODE button.

• When you want to program a command to a button to which you

have already programmed a command, simply follow the same

procedure given and programming for that button will be

overwritten.

• The remote controller uses infrared rays to send its commands,

as do most other remote controllers. Though most remote

controller codes can be memorized by the remote controller, be

aware that some remote controllers use a system that is quite

different from the remote controller and therefore may not be able

to be programmed.

• Some remote controllers have a single button that performs

multiple functions (for example, the function may change each

time the button is pressed). If this is the case, each function must

be programmed to a separate button on the remote controller.

• Once you have transferred the commands from the other remote

controller, refer to the instruction manual that came with that

product for instructions on how to operate that product.

• Make sure both the remote controller and the other remote

controller have new batteries. If either of them has batteries that

are low, you may not be able to program the commands of the

other remote controller properly into the remote controller.

See page 83 for how to erase the memorized commands from

all buttons.

Controlling other components connected to the DVD Receiver

Press and hold down the button

(that corresponds to the command

you are programming) on the

remote controller of the other

device until the SEND/LEARN

indicator on the remote controller

flashes twice.

After flashing twice, the SEND/LEARN

indicator will light again.

Repeat Steps 3 and 4 to transfer all

the commands you desire from the

other remote controller and

program them to buttons on the

remote controller under the same

MODE.

Repeat Steps 2 through 4 to program

commands to a different MODE (e.g., when

programming from a different remote

controller).

Press the MODE button that you

pressed in step 2 to complete the

programming.

Operate the newly programmed

buttons to make sure the learning

function was performed properly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dr s 2 2 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info