Bedienungsanleitung Onkyo DR-S501 (Seite 62 von 84) (Englisch)

60905

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

DVD Onscreen Setup Menus—Continued

PAL Output Setting

With this setting you can specify how the DVD receiver

outputs video signals when playing NTSC format

DVD-Video discs or Video CDs.

Auto (default):

Use this option if your TV supports both PAL and

NTSC. The DVD receiver does not convert the video for-

mat. When you play a PAL disc, the video output will be

PAL format. And when you play an NTSC disc, it’ll be

NTSC format.

NTSC:

Use this option if your TV doesn’t support PAL play-

back, or the picture is distorted when watching PAL

discs. The DVD receiver will convert PAL format video

signals to NTSC-compatible format.

PAL:

Use this option if your TV doesn’t support NTSC play-

back, or the picture is distorted when watching NTSC

discs. The DVD receiver will convert NTSC format

video signals to PAL-compatible format.

Note:

If you select the wrong setting by mistake and loose the

picture, while pressing and holding the Next [ ] but-

ton on the front panel, press the [STANDBY/ON] button

on the front panel repeatedly to get picture.

SCART Output Setting

(European model only)

With this setting you can select the video format to be

used for the SCART AV CONNECTOR: RGB or com-

posite video. Before changing this setting, refer to your

TV’s manual to see if its SCART input can accept video

signals in these formats.

Composite (default):

Composite video offers standard quality.

RGB:

This format offers the best picture quality.

Notes:

• If you select a format that is not supported by your TV,

the setup menu may disappear from the screen. If this

happens, switch off your equipment, connect the DVD

receiver to your TV with a composite video cable, and

then change this setting.

• When “RGB” is selected, nothing is output by the

component video output and HDMI output.

Digital/HDMI Audio Out

With this setting you can configure the HDMI digital

output.

All (default):

Dolby Digital and DTS signals are output as they are.

If your TV or amp doesn’t support higher sampling rates,

set the “Linear PCM Out” setting to “Down Sample On”

(below).

PCM:

Dolby Digital and DTS signals are down mixed to 2

channels and output as PCM. If your TV doesn’t support

Dolby Digital and DTS, choose this option. Audio from

speakers connected to DVD receiver is also changed to

PCM.

Note:

MPEG is output as PCM regardless of this setting.

Linear PCM Out

With this setting you can configure the DVD receiver to

output digital audio with higher sampling rates (e.g.,

88.2 kHz, 96 kHz) as it is or to down sample it to 48 kHz

or below.

If the TV you connect to the DVD receiver’s HDMI out-

put supports 96 kHz digital audio, select “Down Sample

Off”. Otherwise, select “Down Sample On”.

Down Sample On:

Source of 48 kHz or more is down sampled to 48 or

44.1 kHz.

Down Sample Off (default):

Sources are output as they are.

Notes:

• Some copy-protected DVD-Video discs may use

96 kHz digital audio only for D/A conversion to the

analog audio outputs.

• With some discs, even if you select “Down Sample

Off”, the digital audio will be down sampled, and in

some cases may not be output by the DVD receiver’s

HDMI output.

Audio Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo DR-S501 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo DR-S501

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info