463989
10
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
En-10
Troubleshooting
There’s no sound
•Make sure your iPod is actually playing.
•Make sure your iPod is inserted properly in the RI
Dock.
•Make sure the RI Dock is connected to the correct
input jacks on your AV receiver/amp. Do not con-
nect it to any output jacks.
•Make sure your AV receiver/amp is turned on, the
correct input source is selected, and the volume is
turned up.
•Make sure the plugs are pushed in all the way.
•Make sure the AC adapter is connected to a suit-
able wall outlet and connected to the RI Dock.
•Try resetting your iPod.
Your AV receiver/amps remote controller
doesn’t control your iPod
•3rd generation iPod models are not supported.
•Make sure your iPod is properly inserted in the RI
Dock. If your iPod is in a case, it may not connect
properly to the RI Dock. Always remove your iPod
from the case before inserting it into the RI Dock.
•The iPod cannot be operated while it’s displaying
the Apple logo.
•If your AV receiver/amp’s remote controller has
remote mode buttons, make sure you’ve selected
the right mode.
•Check the RI Dock’s RI MODE switch setting.
•When you use your AV receiver/amps remote con-
troller, point it toward your AV receiver/amp.
•The RI Dock must be connected to your AV
receiver/amp with both an cable and an audio
cable.
•The TAPE IN on some amps can be set to TAPE, MD,
or CDR. Make sure the RI Dock’s RI MODE switch
setting and the remote control mode match this
setting. See your amp’s manual for more informa-
tion.
If you still can’t control your iPod, start playback by
pressing your iPod’s Play button. Remote opera-
tion should then be possible.
•Make sure your AV receiver/amp’s remote control-
ler is set to the correct remote control ID.
Your AV receiver/amp unexpectedly
selects your iPod as the input source
•Always pause iPod playback when listening to
another component that’s connected to your AV
receiver/amp. If playback is not paused, the Direct
Change function may select your iPod as the input
source by mistake when one track ends and
another starts playing.
Caution: If you use this product under
direct sunlight, fluorescent light, or germi-
cidal lamp, ultraviolet or another elements in
the light may change the product exterior
color.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo DS-A1XP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info