Bedienungsanleitung Onkyo dv sp 1000 (Seite 44 von 96) (Englisch)

136557

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Initial Setup

—Continued

Notes:

•You can change the language of the onscreen setup

menus, and specify your preferred languages for DVD

menus, soundtracks, and subtitles on the Language

menu (see page 81).

• When a DVD doesn’t have menus, soundtracks, and

subtitles in different languages, its default language is

used.

• When the DV-SP1000/DV-SP1000E is plugged in and

set to Standby, it automatically checks if it’s con-

nected to any other i.LINK components. If it is, the

default setting for the i.LINK Output Setting becomes

On. If not, the default becomes Off.

Press the [ENTER] button, use

the Up and Down [ ]/[ ] but-

tons to select On or Off, and then

press the [ENTER] button.

Choose Off if your multichannel amp

has its own speaker setup function.

Choose On if your multichannel amp

has no speaker setup function.

If you select Off, the following settings

cannot be set and the Initial Setup menu

closes. If you select On, the Speaker

Setting menu appears.

Here you can specify the size of the

speakers being fed from the FRONT,

SURR 1/SURR 2, CENTER, and

SUBWOOFER AUDIO OUTPUTs.

For speakers with a cone diameter

larger than 6-1/2 inches (16 cm), spec-

ify

Large

For those with a smaller

diameter, specify

Small

See page 76

for more information.

Press the [ENTER] button, use

the Left and Right [ ]/[ ] but-

tons to set the Subwoofer set-

ting, and then press [ENTER]

again.

Off:

Select if no subwoofer is being

used.

On (default):

Select if a subwoofer is

being used.

Use the Left and Right [ ]/[ ]

buttons to set the Front Speaker

setting, and then press the

[ENTER] button.

Large:

Select if the front speakers are

large.

Small (default):

Select if the front

speakers are small.

Note that if the Subwoofer setting is set

to Off, this setting is ﬁxed at Large.

ENTER

Remote controller

ENTER

Remote controller

ENTER

Use the Left and Right [ ]/[ ]

buttons to set the Center Speaker

setting, and then press the

[ENTER] button.

Large:

Select if the center speaker is

large.

Small (default):

Select if the center

speaker is small.

Off:

Select if no center speaker is being

used.

Note that if the Front Speaker Size is

set to Small, the Large option cannot be

selected.

Use the Left and Right [ ]/[ ]

buttons to set the Surround

Speaker setting, and then press

the [ENTER] button.

Large:

Select if the surround speakers

are large.

Small (default):

Select if the surround

speakers are small.

Off:

Select if no surround speakers are

being used.

The Initial Setup menu closes and the

setup is complete.

The DV-SP1000/DV-SP1000E is now

ready for use. See page 45 for informa-

tion on playing discs.

Remote controller

ENTER

Remote controller

ENTER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dv sp 1000 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo dv sp 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info