136557
63
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
63
Advanced Playback
—Continued
With the Last Memory function you can resume play-
back from where you left off even if the disc has been
removed and the DV-SP1000/DV-SP1000E has been set
to Standby. Last Memory also remembers the soundtrack
and subtitle settings you were using.
Notes:
The Last Memory function can store the last point for
up to six DVDs. When you set the Last Memory func-
tion for a seventh disc, the first disc’s settings are
deleted.
The Last Memory function can store the last point for
only one VCD, and that point will be lost when the
disc is removed.
The Last Memory function may not work properly
with VCDs that support PBC.
The Last Memory function will not work while a
menu is being displayed onscreen.
The Last Memory function may not work with some
DVDs.
If you inadvertently turn off the DV-SP1000/
DV-SP1000E during playback, you can resume play-
back from the last point simply by pressing the Play
[] button.
You can display various information about a disc, title,
chapter, group, or track onscreen and on the
DV-SP1000/DV-SP1000E’s display.
Last Memory
1
During playback, press the
[LAST MEMORY] button.
The last memory point for the disc is
stored, the LAST M indicator appears,
and “Last Mem” appears on the display.
If the [LAST MEMORY] button is
pressed again, the last memory point is
updated.
2
To stop playback, press the Stop
[] button once or twice.
Now you may remove the disc
and turn off the DV-SP1000/
DV-SP1000E.
3
To resume playback, load the
disc, and then press the Play [ ]
button.
The Last Memory dialog box appears.
+
10 0
CLEAR
123
456
789
INPUT
I
+
-
ENTER
S
E
T
U
P
R
E
T
U
R
N
L4
L2L1
V OFFV IN
ASPECT
A
-
B
REPEAT
RSLTNANGLE
SBTTL
AUDIO
L3
T
O
P
M
E
N
U
M
E
N
U
VOL
+
-
V3
TV
INPUTDMS
DVD AMP VCR
DVD
V1 V2
LM RD
ZOOM
CH
L MODE
LEARNING
SEARCH MEMORY DIMMER AMP INPUT
DISPLAY
AUDIO
SEL
ZOOM
ON
PICTURE
CONTROL
RANDOM
STEP/SLOW
MUTING
ANGLESUBTITLEAUDIO
ASPECTA
-
BREPEAT
ON STANDBY
T
V
T
V CH
T
V VOL
RC
-
563DV
LAST
MEMORY
RESOLUTION
MODE
AMP INPUT
REC
OPEN
/
CLOSE
VIDEO INPUT VIDEO OFF
LAST MEMORY
ENTER
DISPLAY
DISPLAY
VCD
DVD-V
LM
LAST MEMORY
Remote controller
Remote controller
Remote controller
4
To resume playback from the last
memory point, select Yes, and
then press [ENTER].
To start playback from the beginning,
select No, and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
Memory Clear, and then press
[ENTER].
Displaying Information
During playback, press the [DIS-
PLAY] button repeatedly.
The information displayed depends on
the type of disc. See the following
tables.
ENTER
Remote controller
VCD
CD
MP3
DVD-V
DVD-A
SACD
DVD-VR
DISPLAY
DISPLAY
Remote controller
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo dv sp 1000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo dv sp 1000

Onkyo dv sp 1000 Bedienungsanleitung - Französisch, Spanisch - 192 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info