Bedienungsanleitung Onkyo dv sp 501 (Seite 50 von 60) (Englisch)

136788

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Additional information

DVD-Video discs come in several different screen aspect

ratios, ranging from TV programs, which are generally

4:3, to Cinema- Scope widescreen movies, with an

aspect ratio of up to about 7:3.

Televisions, too, come in different aspect ratios; “stan-

dard” 4:3 and widescreen 16:9.

Widescreen TV users

If you have a widescreen TV, the TV Screen setting

(page 45) of this player should be set to “16:9 (Wide)”.

When you watch discs recorded in 4:3 format, you can

use the TV controls to select how the picture is pre-

sented. Your TV may offer various zoom and stretch

options; see the instructions that came with your TV for

details.

Please note that some movie aspect ratios are wider than

16:9, so even though you have a widescreen TV, these

discs will still play in a “letter box” style with black bars

at the top and bottom of the screen.

Standard TV users

If you have a standard TV, the “TV Screen” setting

(page 45) of this player should be set to “4:3 (Letter

Box)” or “4:3 (Pan&Scan)”, depending on which you

prefer.

Set to “4:3 (Letter Box)”, widescreen discs are shown

with black bars top and bottom.

Set to “4:3 (Pan&Scan)”, widescreen discs are shown

with the left and right sides cropped.

Although the picture looks larger, you don’t actually see

the whole picture.

Please note that many widescreen discs override the

player’s settings so that the disc is shown in letter box

format regardless of the setting.

Note:

• Using the “16:9 (Wide)” setting with a standard 4:3

TV, or either of the “4:3” settings with a widescreen

TV, will result in a distorted picture.

Use this procedure to reset all the player’s settings to the

factory default.

(Not North American model)

The default setting of this player is “AUTO”, and unless

you notice that the picture is distorted when playing

some discs, you should leave it set to “AUTO”. If you

experience picture distortion with some discs, set the TV

system to match your country or region’s system. Doing

this, however, may restrict the kinds of disc you can

watch. The table below shows what kinds of disc are

compatible with each setting (“AUTO” , “PAL” and

“NTSC”).

Note:

•You have to switch the player into standby (press

STANDBY/ON) before each change.

Screen sizes and disc formats

Resetting the player

Switch the player into standby.

Using the front panel buttons, hold

down the

STOP button and

press

STANDBY/ON to switch the

player back on.

Setting the TV system

If the player is on, press

STANDBY/

ON to switch it to standby.

Using the front panel controls,

hold down then press

STANDBY/ON to switch the TV sys-

tem.

The TV system changes as follows:

ANDBY

STANDBY/ON

STOP

RETURN SETUP

TOP MENU MENU

ANDBY

OFF

STANDBY/ON

POWER

DISPLAY PLAY MODE

DIMMER CLEAR

STOP

PLAYPAUSE

STANDBY/ON

ANDBY

STANDBY/ON

ANDBY

STANDBY/ON

AUTO NTSC PAL

DV-SP501_En.book Page 50 Tuesday, May 20, 2003 4:17 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dv sp 501 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info