Bedienungsanleitung Onkyo dv sp 502 (Seite 63 von 68) (Englisch)

136555

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

FAQ

My DV-SP502/DV-SP502E switches on but there is nothing displayed on my TV.

• Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player

to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

After I load a DVD disc, it ejects automatically after a few seconds!

• Most likely, the disc is the wrong region for your player. The region number should be printed on the disc; check it

against the region number of the player (which you can ﬁnd on the rear panel). See also “DVD-Video regions” on

page 55. If the region number is OK, it may be that the disc is damaged or dirty. Clean the disc and look for signs of

damage. See also “Handling Discs” on page 10.

Why won’t the disc I loaded play?

• First check that you loaded the disc the right way up (label side up), and that it’s clean and undamaged. See “Cleaning

Discs” on page 10 for information on cleaning discs.

If a disc loaded correctly won’t play, it’s probably an incompatible format or disc type, such as DVD-ROM. See

“Supported Discs” on page 9 for more on disc compatibility.

I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play

some discs?

• Some movie formats are such that even when played on a widescreen TV, black bars are necessary at the top and

bottom of the screen. This is not a malfunction.

I have a standard (4:3) TV and set the player to show widescreen DVDs in pan & scan format, so why

do I still get black bars top and bottom with some discs?

• Some discs override the display preferences of the player, so even if you have 4:3 (Pan & Scan) selected, those discs

will still be shown in letter box format. This is not a malfunction.

My AV receiver is deﬁnitely compatible with 96/88.2kHz Linear PCM audio, but it doesn’t seem to work

with this player. What’s wrong?

•For digital copy-protection purposes, some 96/88.2kHz DVD discs only output digital audio downsampled to 48/

44.1kHz. This is not a malfunction. To fully take advantage of the high sampling rate audio, connect the analog audio

outputs to your ampliﬁer/receiver.

Why can’t I hear SACD audio through the digital outputs?

•SACD audio is only available through the analog outputs. This is not a malfunction. Some DVD-Audio discs too only

output audio through the analog outputs.

Is it better to listen to DVD-Audio discs through the analog outputs?

• Some DVD-Audio discs do not output anything through the digital outputs, and multichannel discs are downmixed

to stereo for the digital output. In addition, high sampling rate DVD-Audio discs (higher than 96kHz) automatically

downsample audio output from the digital outputs. Using the multichannel analog audio outputs for DVD-Audio have

none of these limitations.

My DVD-Audio disc starts playing, but then suddenly stops!

• The disc may have been illegally copied.

DV-SP502E_En.book Page 63 Friday, July 16, 2004 3:34 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo dv sp 502 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info