Bedienungsanleitung Onkyo DX-C390 (Seite 15 von 28) (Englisch)

476168

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Basic Playback

—Continued

Notes:

• When you close the disc tray, the current disc will be

the one in the front-right disc bay. When you open the

disc tray, the last disc you selected (i.e., the current

disc), will be in the front-right disc bay.

• When the disc tray is closed, all of the disc indicators

appear until the DX-C390 has checked each bay for

the presence of a disc. If a bay is found to have no disc,

the corresponding indicator disappears.

The section explains how to select discs.

This section explains how to load discs without stopping

playback.

Note:

• The DX-C390 cannot play the next disc while the disc

tray is open. Be sure to close the disc tray as soon as

you’ve ﬁnish loading discs.

You can adjust the brightness of the display as follows.

Note:

The disc tray light comes on when the DX-C390 is

turned on, and is brighter while the disc tray is open.

Starting Playback

To start playback, press the PLAY

[] button.

Playback starts from the ﬁrst track on

the current disc, continues with the sub-

sequent discs, and stops when disc #6

has been played.

Empty disc bays are skipped.

Tip:

If you press one of the DISC

SELECT buttons, playback of the

selected disc will start automatically.

Selecting Discs

When playback is stopped

Use the DISC SELECT buttons to

select a disc. Playback will start auto-

matically.

Or, use the [DISC SKIP] button or the

remote controller’s DISC [+] and [–]

buttons to select a disc. In this case

you’ll need to press the PLAY [ ] but-

ton to start playback.

During playback

Use the DISC SELECT buttons, [DISC

SKIP] button, or the remote controller’s

DISC [+] and [–] buttons to select a

disc. The current disc will stop playing,

and the newly selected disc will be

played.

On the display, the number of the cur-

rent disc has a circle around it.

TRACK

DISC

REMAIN

DISC

Remote

controller

Loading Discs During Playback

To open the disc tray, press the

[] button.

The disc that’s currently playing

remains inside the DX-C390 and its

disc bay is empty and won’t come to the

front.

Load or remove your discs, and

use the [DISC SKIP] button or the

remote controller’s DISC [+] and

[–] buttons to access the other

disc bays.

To close the disc tray, press the

[] button again.

Playback of the current disc continues

uninterrupted until you stop playback

or select another disc.

Tip:

If you press one of the DISC

SELECT buttons, the disc tray will

close, and playback of the newly

selected disc will start automatically.

Adjusting the Display Brightness

Press the [DIMMER] button

repeatedly to cycle through the

following options: normal, dim,

dimmer, dimmer with disc tray

light off.

DX-C390_En.book Page 15 Wednesday, August 27, 2003 5:49 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo DX-C390 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo DX-C390

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info