Bedienungsanleitung Onkyo HT-R990 (Seite 27 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Using Remote Playback

Using the Tuner

With the built-in tuner you can enjoy AM and FM radio

stations. You can store your favorite stations as presets for

quick selection.

You can also change the frequency steps (➔ page 54).

Tuning into Radio Stations

■ Auto tuning mode

■ Manual tuning mode

In manual tuning mode, FM stations will be in mono.

Start Windows Media Player 12.

To enable remote playback, you must first configure

Windows Media Player 12.

Press NET.

The “NET” screen appears. The NET indicator

lights. If it flashes, verify the network connection.

Use q/w/e/r to select “dlna”, and press ENTER.

A list of media server appears.

Note

• Remote playback cannot be used while the music files of

another media server are being played. You must stop their

playback first.

On Windows Media Player 12, right-click on a

music file.

The right-click menu appears. For selecting another

media server, select the desired media server from the

“Other Libraries” menu on Windows Media Player

12.

Select the AV receiver from the right-click menu.

The “Play to” window appears and playback on the

product starts. Operations during remote playback

can be made from the “Play to” window of Windows

7 on your personal computer. During remote

playback, operations (such as Playback, Pause, Fast

Forward, Fast Rewind, Previous, Next, Repeat,

Random) cannot be made.

Adjusting the Volume.

You can adjust the volume by adjusting the volume

bar in the “Remote playback” window. The default

maximum volume level is 82 (0dB). If you wish to

change this, enter the value from the Web Setup in

your browser.

The volume value of the remote window and the

volume value of the AV receiver may not always

match.

Adjustments you make to the volume in the AV

receiver will not be reflected in the “Remote

playback” window.

Listening to AM/FM Radio

This section describes the procedure using the

buttons on the front panel unless otherwise specified.

Press TUNER to select either “AM” or “FM”.

In this example, FM has been selected.

Each time you press TUNER, the radio band changes

between AM and FM.

(Actual display depends on the country.)

Press TUNING MODE so that the AUTO indicator

lights on the display.

Press TUNING q/w.

Searching stops when a station is found.

When tuned into a station, the TUNED indicator

lights. When tuned into a stereo FM station, the FM

STEREO indicator lights on the display, as shown.

Tip

• Tuning into weak FM stereo stations

If the signal from a stereo FM station is weak, it may be

impossible to get good reception. In this case, switch to

manual tuning mode and listen to the station in mono.

Press TUNING MODE so that the AUTO indicator

goes off on the display.

Press and hold TUNING q/w.

The frequency stops changing when you release the

button.

Press the buttons repeatedly to change the frequency

one step at a time.

Band Frequency

TUNED

TERE

AUTO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info