Bedienungsanleitung Onkyo HT-R990 (Seite 62 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

■ Status Messages

If either of the following messages is not displayed on the

AV receiver’s display, check the connection to your

iPod/iPhone.

• PORT Reading

The AV receiver is checking the connection with the

dock.

• PORT Not Support

The AV receiver do not support the connected dock.

•PORT UP-A1

UP-A1 Dock is connected.

Note

• The AV receiver displays the message “UP-A1” for several

seconds after recognizing the UP-A1.

RI Dock

With the RI Dock, you can easily play the music stored on

your Apple iPod/iPhone through the AV receiver and

enjoy great sound, and watch iPod/iPhone slideshows and

videos on your TV. In addition, the onscreen display

(OSD) allows you to view, navigate, and select your

iPod/iPhone model’s contents on your TV, and with the

supplied remote controller, you can control your

iPod/iPhone from the comfort of your sofa. You can even

use the AV receiver’s remote controller to operate your

iPod/iPhone.

Note

• Enter the appropriate remote control code before using the AV

receiver’s remote controller for the first time (➔ page 64).

• Connect the RI Dock to the AV receiver with an u cable

(➔ page 19).

• Set the RI Dock’s RI MODE switch to “HDD” or

“HDD/DOCK”.

• Set the AV receiver’s Input Display to “DOCK” (➔ page 40).

■ System Function

System On

When you turn on the AV receiver, the RI Dock and

iPod/iPhone turn on automatically. In addition, when RI

Dock and iPod/iPhone are on, the AV receiver can be

turned on by pressing 8SOURCE.

Auto Power On

If you press the remote controller’s 1 (Playback)

while the AV receiver is on standby, the AV receiver

will automatically turn on, select your iPod/iPhone as

the input source, and your iPod/iPhone will start

playback.

Direct Change

If you start iPod/iPhone playback while listening to

another input source, the AV receiver will automatically

switch to the input to which the RI Dock is connected.

Other Remote Controllers

You can use the remote controller that came with the

AV receiver to control other iPod/iPhone functions. The

available functionality depends on the AV receiver.

iPod/iPhone Alarm

If you use the Alarm function on your iPod/iPhone to

start playback, the AV receiver will turn on at the

specified time and select your iPod/iPhone as the input

source automatically.

Note

• Linked operations do not work with video playback or when the

alarm is set to play a sound.

• If you use your iPod/iPhone with any other accessories,

iPod/iPhone playback detection may not work.

• This function works only in Standard mode (➔ page 63).

• The System On function may not work depending on the RI

Dock.

Note

• On the iPod with video and iPod nano (1st generation), the click

wheel is disabled during playback.

By pressing the REMOTE MODE that’s been

programmed with the remote control code for your Dock,

you can control your iPod/iPhone in the Dock with the

buttons described further in this section.

See “Entering Remote Control Codes” for details on

entering a remote control code (➔ page 64).

See the Dock’s instruction manual for more information.

■ UP-A1 Dock

PORT is preprogrammed with the remote control code for

controlling a Dock via Universal Port.

You can control your iPod/iPhone when “PORT” is

selected as the input source.

■ RI Dock

• Set the RI Dock’s RI MODE switch to “HDD” or

“HDD/DOCK”.

• 8SOURCE may not work with a remote control code

(without u). In this case, make an u connection and

enter the remote control code 81993 (with u).

With the RI Control

Make an u connection and enter the remote

control code 81993 (with u).

• Set the AV receiver’s Input Display to “DOCK”

(➔ page 40).

Without the RI Control

You must enter the remote control code 82990 first

(➔ page 65).

■ Operating Notes

• Use the AV receiver’s volume control to adjust the playback

volume.

• While your iPod/iPhone is inserted in the RI Dock, its volume

control has no effect.

• If you do adjust the volume control on your iPod/iPhone while

it’s inserted in the RI Dock, be careful that it’s not set too loud

before you reconnect your headphones.

Controlling Your iPod/iPhone

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info