Bedienungsanleitung Onkyo HT-R990 (Seite 82 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Using an RIHD-compatible TV, Player, or Recorder

p, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo

components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over

HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however,

operation with components other than p-compatible components cannot be guaranteed.

The following components are p-compatible (as

of January 2011).

■ TV

• Toshiba REGZA-LINK compatible TV

•Sharp TV

■ Players/Recorders

• Onkyo and Integra p-compatible players

• Toshiba REGZA-LINK compatible players and

recorders (only when used together with Toshiba

REGZA-LINK compatible TV)

• Sharp players and recorders (only when used together

with Sharp TV)

Models other than those mentioned above may have some

interoperability if compatible with CEC, which is part of the

HDMI Standard, but operation cannot be guaranteed.

Note

• For proper linked operations, do not connect more p-

compatible components than the quantities specified below, to

the HDMI input terminal.

– Blu-ray Disc/DVD players: up to three.

– Blu-ray Disc/DVD recorders/Digital Video Recorders: up to

three.

– Cable/Satellite Set-top boxes: up to four.

• Do not connect the AV receiver to the other AV receiver/AV

amplifier via HDMI.

• Proper linked operations are not guaranteed when more

p-compatible components than the above-mentioned

quantities are connected.

■ For p-compatible TV

The following linked operations are enabled by

connecting the AV receiver to an p-compatible

TV.

• The AV receiver will enter standby mode when the

power of the TV is turned to standby.

• You can set on the menu screen of the TV to either

output the audio from the speakers connected to the AV

receiver, or from the speakers of the TV.

• It is possible to output the video/audio coming from the

antenna or from the input jack of the TV from the

speakers connected to the AV receiver. (A connection

such as optical digital cable or similar is required above

the HDMI cable.)

• Input to the AV receiver can be selected with the remote

controller of the TV.

• Operations such as volume adjustment or similar for the

AV receiver can be performed from the remote

controller of the TV.

■ For p-compatible players/recorders

The following linked operations are enabled by

connecting the AV receiver to an p-compatible

player/recorder.

• When the playback is started on the player/recorder,

input of the AV receiver will switch to the HDMI input

of the player/recorder that is playing back.

• Operation of the player/recorder is possible using the

remote controller supplied with the AV receiver.

Depending on the model used, not all operations may be

available.

About p-compatible components

Operations that can be performed with

p connection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info