Bedienungsanleitung Onkyo HT-R993 (Seite 15 von 70) (Englisch, Französisch, Spanisch)

577745

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Step 3:

Playing Back

Using the multi-zone function

You can multi-zone connect the unit with an integrated

amplifier and speakers in a separate room and play sound

from an external device connected to the analog audio

input jacks of the unit, sound from the "NET", "USB" or

"BLUETOOTH" source, and the AM/FM broadcasting. It

is possible to perform playback in the main room and a

separate room at the same time, for example by playing

the Blu-ray Disc player in the main room where the unit is

placed while playing Internet radio in a separate room. It is

also possible to perform playback only in a separate room.

 As for analog audio input, it is possible to play the

same source or different sources in the main room and

separate room.

 As for the "NET", "USB" and "BLUETOOTH", you cannot

select different inputs for the main room and separate

room. For example, if "NET" has been selected in the

main room and then "USB" is selected as playback

source in the separate room, the input in the main room

will change to "USB" accordingly.

 When listening to AM/FM broadcasting, you cannot

select different stations for the main room and separate

room. Therefore broadcasting of the same station will be

heard in the both rooms.

Connecting with Player

To output audio of the Blu-ray Disc player or such other

player as the source of multi-zone playback, it is necessary

to connect the RCA audio output jacks of the player and the

analog audio input jacks of the unit using the RCA cable.

AUDIO

OUT

 Output to multi-zone is not possible if the connection is

only with HDMI cable or digital cable.

 Some players require analog audio output setting.

Making multi-zone Connection



Connecting an amplifier or receiver in another

room

It is possible to play 2 channel source in a separate room

while 7.2 channel source is being played in the main room.

Connect the LINE OUT ZONE2 jacks of the unit and the

line-in jacks of the integrated amplifier in a separate room

with an RCA cable.

Zone 2

 The volume should be adjusted with the integrated

amplifier used in the separate room.



Connecting speakers in another room

It is possible to directly connect the speakers in another

room without an amplifier. Connect the speakers in another

room to the SPEAKERS ZONE2 speaker terminals of

the unit using speaker cables. Note that 5.2 ch will be the

maximum (

) in the main room during Zone 2 playback. No

sound will be output from the Surround Back speakers and

Height speakers.

¼

In this case, some listening modes including Dolby Atmos cannot be

selected.

Zone 2

Change the setting: After connecting the speakers, press

RCV and then HOME on the remote controller, select

"Setup" - "2. Speaker Setup" - "Speaker Settings" and set

"Powered Zone2" to "Yes".



Adjust the volume on this unit. To adjust the volume,

press ZONE2

on the remote controller and adjust with

VOL

To control on the main unit, press ZONE2 and

within 8 seconds, adjust with the MASTER VOLUME

control. You can mute the sound by pressing MUTING on

the remote controller.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R993 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R993

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info