Bedienungsanleitung Onkyo HT-RC630 (Seite 13 von 56) (Englisch, Französisch, Spanisch)

553776

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Step 3:

Playing Back

Using the multi-zone function

You can listen to the sound in a separate room by making

the Zone connection (analog) between the unit and an

integrated amplifier placed in the separate room.

You can use a Blu-ray Disc player in the main room in

which the unit is placed, while receiving AM/FM broadcast

in the separate room. Audio can be played in the main

room and the separate room simultaneously, or only in the

separate room.

r The sources you can enjoy in the separate room are the

players connected to the analog audio input jacks of the

unit, and AM/FM broadcast.

r When listening to AM/FM broadcasting, you cannot

select different stations for the main room and separate

room. Therefore broadcasting of the same station will be

heard in the both rooms.

Connecting with Player

To use a Blu-ray Disc player or other players as the source

of Zone audio output, it is necessary to connect the RCA

audio output jacks of the player and the analog audio input

jacks of the unit using the analog audio (RCA) cable.

AUDIO

OUT

r

Zone audio output is not possible if the player and the unit

are connected only via HDMI cable or digital cable.

r

Some players require analog audio output setting.

Making multi-zone connection

Connect the ZONE 2 LINE OUT jacks of the unit and the

line-in jacks of the pre-main amplifier in a separate room

with an analog audio (RCA) cable.

Performing multi-zone playback

Press ZONE2 on the remote controller, point the

remote controller at the remote controller sensor

and press

RECEIVER.

"Z2" lights on the unit and the ZONE function is enabled.

(ZONE 2 is now on.)

Press ZONE2 on the remote controller again and

press INPUT SELECTOR of the input to be played in

a separate room.

To play the same source in the main room and separate

room, hold down ZONE2 for approximately 3 seconds.

The volume should be adjusted with the pre-main

amplifier used in the separate room.

To control on the main unit: Press ZONE2 and within

|UGEQPFURTGUUVJGKPRWVUGNGEVQTDWVVQPQHVJGKPRWVVQDG

played in a separate room. To play the same source in the

main room and separate room, press ZONE2 twice.

To turn off the multi-zone function: Press ZONE2 on the

remote controller and press

RECEIVER. Alternatively

press OFF on the main unit.

r Multi-zone playback cannot be performed if a player is

connected to HDMI jack using HDMI cable or OPTICAL/

COAXIAL jack using digital cable. Connect the players

using analog audio cable for multi-zone playback. Analog

audio output setting may be necessary on the player.

r If ZONE 2 is on, power consumption during standby

becomes larger than normal.

r While ZONE 2 is on, the RI linked system function

(interlink between Onkyo components) is disabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-RC630 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-RC630

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info