Bedienungsanleitung Onkyo HT-S9405THX (Seite 19 von 172) (Englisch, Französisch)

492669

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

With u (Remote Interactive), you can use the following

special functions:

■ System On/Auto Power On

When you start playback on a component connected via

u while the AV receiver is on Standby, the AV

receiver will automatically turn on and select that

component as the input source.

■ Direct Change

When playback is started on a component connected via

u, the AV receiver automatically selects that

component as the input source.

■ Remote Control

You can use the AV receiver’s remote controller to

control your other u-capable Onkyo components,

pointing the remote controller at the AV receiver’s

remote control sensor instead of the component. You

must enter the appropriate remote control code first

(➔ page 65).

Note

•Use only u cables for u connections. u cables are supplied

with Onkyo components.

• Some components have two u jacks. You can connect either

one to the AV receiver. The other jack is for connecting

additional u-capable components.

• Connect only Onkyo components to u jacks. Connecting other

manufacturer’s components may cause a malfunction.

• Some components may not support all u functions. Refer to

the manuals supplied with your Onkyo components.

• While Zone 2 is on, the System On/Auto Power On and Direct

Change u functions do not work.

See “Recording” for details on recording (➔ page 40).

Note

• The AV receiver must be turned on for recording. Recording is

not possible while it’s in standby mode.

• If you want to record directly from your TV or playback VCR to

the recording VCR without going through the AV receiver,

connect the TV/VCR’s audio and video outputs directly to the

recording VCR’s audio and video inputs. See the manuals

supplied with your TV and VCR for details.

• Video signals connected to composite video inputs can be

recorded only via composite video outputs. For example, if your

TV/VCR is connected to a composite video input, the recording

VCR must be connected to a composite video output.

• The surround sound and DSP listening modes cannot be

recorded.

• Copy-protected Blu-ray Discs and DVDs cannot be recorded.

• Sources connected to a digital input cannot be recorded. Only

analog inputs can be recorded.

• DTS signals will be recorded as noise, so don’t attempt analog

recording of DTS CDs or LDs.

Connecting Onkyo u Components

Make sure that each Onkyo component is

connected with an analog audio cable (connection

G in the hookup examples) (➔ page 17).

Make the u connection (see the illustration).

If you’re using an RI Dock, or cassette tape deck,

change the Input Display (➔ page 40).

ANALOG

AUDIO OUT

ANALOG

AUDIO OUT

e.g., CD player

RI Dock

Connecting a Recording Component

AUDIO

VIDEO

VCR, DVD recorder,

cassette tape deck,

CDR, MD recorder, etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-S9405THX Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-S9405THX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info