Bedienungsanleitung Onkyo HTX-22HDX (Seite 40 von 56) (Englisch)

492671

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Setup—Continued

Sp Distance (Speaker Distance)

With the Speaker Distance settings, you can

specify the distances from the speakers to

your listening position.

■ Unit

feet:

Distances can be set in feet. Range: 1 to

30 feet in 1-foot steps.

meters:

Distances can be set in meters. Range: 0.3

to 9 meters in 0.3-meter steps.

On North American models, the default set-

ting is feet. On other models, it’s meters.

■

Front, Center, SurrRight (Surround Right),

SurrLef (Surround Left), Subwoofer

Speakers set to No or None in the Speaker

Configuration on page 39 cannot be selected.

The default value is 0.

Notes:

• The Center and Subwoofer distances can

be set up to 5 ft. (1.5 m) more or less than

the Front distance. For example, if the

Front distance is set to 20 ft. (6 m), the

Center and Subwoofer distances can be set

between 15 and 25 ft. (4.5 and 7.5 m).

• The Surround distance can be set up to 5 ft.

(1.5 m) more or 15 ft. (4.5 m) less than the

Front distance. For example, if the Front

distance is set to 20 ft. (6 m), the Surround

distance can be set between 5 and 25 ft.

(1.5 and 7.5 m), and if the Front distance is

set to 10 ft. (3 m), they can be set between

1 and 15 ft. (0.3 and 4.5 m).

Level Cal (Level Calibration)

With the Level Calibration settings, you can

adjust the volume of each speaker so that all

speakers can be heard equally at your listen-

ing position.

■

Left, Center, Right, SurrRight (Surround

Right), SurrLef (Surround Left), Subwoofer

The levels can be adjusted from –12 to

+12 dB in 1 dB steps (–15 to +12 dB for the

subwoofer). The default value is 0.

Notes:

• Speakers set to No or None in the Speaker

Configuration on page 39 cannot be

selected.

• When you play source material that con-

tains no information in the LFE (Low Fre-

quency Effects) channel, the subwoofer

will produce no sound.

• These levels can also be adjusted by using

the [TEST TONE] button on the remote

controller. Press the [TEST TONE] button

to output the test tone. Use the [CH SEL]

button to select each speaker, and use the

Left and Right []/[] buttons to adjust

the level. The dB indicator flashes while

the levels are being adjusted.

Audio Adjust

With the Audio Adjust settings, you can

adjust the sound and listening modes as you

like.

■ Input (Mux)

This setting determines which channel of a

stereo multiplex source is output. Use it to

select audio channels or languages with mul-

tiplex sources, multilingual TV broadcasts,

and so on.

Main:

The main channel is output (default).

Sub:

The sub channel is output.

M/S:

Both the main and sub channels are out-

put.

■ Input (Mono)

This setting determines which channel is out-

put when the Mono listening mode is used

with a stereo source.

L+R:

Both the left and right channels are output

(default).

Only the left channel is output.

Only the right channel is output.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HTX-22HDX Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HTX-22HDX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info