Bedienungsanleitung Onkyo LS3100 (Seite 23 von 28) (Englisch)

492663

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

■ There’s no sound, or it’s very quiet

■ The subwoofer produces no sound

■ Noise can be heard

■ The remote controller doesn’t work

■ The controller and the TV operated by

your TV remote controller doesn’t

work

■ Volume +/– or Muting function works

by also pressing other buttons when

operating controller with your TV

remote controller

Audio

Make sure that all audio connecting

plugs are pushed in all the way.

Make sure that the input of TV is

connected properly.

Make sure that the polarity of the

speaker cables is correct, and that the

bare wires are in contact with the metal

part of each speaker terminal.

Make sure that the speaker cables are

not shorting.

When the ON/STANDBY LED flashes

white, the muting is enabled. Press

on the remote controller or the

Volume –/+ buttons simultaneously on

the controller to disable the muting.

Make sure that none of the connecting

cables are bent, twisted, or damaged.

—

Make sure that there is no obstacle or

reflection between the controller and the

subwoofer.

—

Make sure that the pairing the controller

and the subwoofer completes normally.

—

Using cable ties to bundle audio cables

with power cords, speaker cables, and

the like may degrade the audio

performance, so refrain from doing it.

—

An audio cable may be picking up

interference. Try repositioning your

cables.

—

Remote Controller

Make sure that the battery is installed

with the correct polarity.

Make sure that the remote controller is

not too far away from the controller, and

that there’s no obstruction between the

remote controller and the controller’s

remote control sensor.

Make sure that the controller is not

subjected to direct sunshine or inverter-

type fluorescent lights. Relocate if

necessary.

—

If the controller is installed in a rack or

cabinet with colored-glass doors, the

remote controller may not work reliably

when the doors are closed.

—

Make sure that the controller mounted

to the wall and the TV set are not placed

too far.

Your TV remote controller might not be

compatible with TV remote controller

preprogrammed codes function. If the

ON/STANDBY LED does not flash by

pressing the buttons on your TV remote

controller, use the supplied remote

controller or program the controller. If

the controller cannot be operated with

your remote controller even if the

programming has been performed, the

controller might not recognize your

remote controller. In this case, use the

supplied remote controller.

—

For some TV remote controller,

Volume +/– or Muting function might

work by also pressing other buttons.

(Volume is increased by pressing 0

(number button), etc.) To avoid this,

program the controller with Volume +/–

or Muting button function on your TV

remote controller.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo LS3100 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo LS3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info