Bedienungsanleitung Onkyo PR-SC5508 (Seite 94 von 108) (Englisch)

452195

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Others

Troubleshooting

If you have any trouble using the AV controller, look for a

solution in this section. If you can’t resolve the issue your-

self, contact your Onkyo dealer.

■ Can’t turn on the AV controller

■ The STANDBY indicator flashes red

■ There’s no sound, or it’s very quiet

■ Only the front speakers produce sound

■ Audio Return Channel audio can be heard via

the TV/monitor speakers connected to the HDMI

OUT SUB jack

If you can’t resolve the issue yourself, try resetting the

AV controller before contacting your Onkyo dealer.

To reset the AV controller to its factory defaults, turn

it on and, while holding down VCR/DVR, press

ON/STANDBY. “Clear” will appear on the display

and the AV controller will enter Standby mode.

Note that resetting the AV controller will delete your

radio presets and custom settings.

To reset the remote controller to its factory defaults,

while holding down RECEIVER, press and hold down

HOME until RECEIVER button lights (about 3 sec-

onds). Within 30 seconds, press RECEIVER again.

Power

Make sure that the power cord is properly plugged

into the wall outlet.

—

Unplug the power cord from the wall outlet, wait five

seconds or more, then plug it in again.

—

The protection circuit has been activated. Remove

the power cord from the wall outlet immediately.

Disconnect all speaker cables and input sources, and

leave the AV controller with its power cord discon-

nected for 1 hour. After that, reconnect the power

cord and set the volume to maximum. If the AV con-

troller stays on, set the volume to minimum, discon-

nect the power cord, and reconnect your speakers

and input sources. If the AV controller turns off

when you set the volume to maximum, disconnect

the power cord, and contact your Onkyo dealer.

—

HOME

RECEIVER

Audio

Make sure that your multichannel power amplifier is

turned on and set up correctly and connected to the

AV controller properly.

Make sure that the digital input source is selected

properly.

Make sure that all audio connecting plugs are pushed

in all the way.

Make sure that the inputs and outputs of all compo-

nents are connected properly.

19-21

Make sure that the input source is properly selected. 26

Check the volume. The AV controller is designed for

home theater enjoyment. It has a wide volume range,

allowing precise adjustment.

—

If the MUTING indicator is flashing on the display,

press the remote controller’s MUTING to unmute

the AV controller.

While a pair of headphones is connected to the

PHONES jack, no sound is output by the speakers.

If there’s no sound from a DVD player connected to

an HDMI IN, check the DVD player’s output set-

tings, and be sure to select a supported audio format.

—

Check the digital audio output setting on the con-

nected device. On some game consoles, such as

those that support DVD, the default setting is off.

—

With some DVD-Video discs, you need to select an

audio output format from a menu.

—

If your turntable uses an MC cartridge, you must

connect an MC head amp, or an MC transformer.

—

Make sure that none of the connecting cables are

bent, twisted, or damaged.

—

Not all listening modes use all speakers. 37

Specify the speaker distances and adjust the individ-

ual speaker levels.

Make sure that the speaker setup microphone is not

still connected.

—

The input signal format is set to “PCM” or “DTS”.

Set it to “Auto”.

When the Stereo or Mono listening mode is selected,

only the front speakers and subwoofer produce

sound.

—

In the Mono listening mode, only the front speakers

output sound if the “Output Speaker” setting is set

to “Left / Right”.

Check the Speaker Configuration. 48

Change the Audio Selector settings of the TV/CD

input selector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo PR-SC5508 Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo PR-SC5508

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info