Bedienungsanleitung Onkyo PR-SC5509 (Seite 90 von 108) (Englisch)

462083

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

■ Playback stops while listening to music files on

the server

■ Can’t connect to the AV controller from a Web

browser

■ Can’t access the music files on a USB device

■ Standby power consumption

■ The sound changes when I connect my

headphones

■ The speaker distance cannot be set as required

■ The display doesn’t work

■ How do I change the language of a multiplex

source

■ The u functions don’t work

■ The functions System Off/Auto Power On and

Direct Change don’t work for components

connected via u

■ When performing “Automatic Speaker Setup”,

the measurement fails and the message

“Ambient noise is too high.” is displayed.

■ The following settings can be made for the

S-Video and composite video inputs

You must use the buttons on the unit to make these

settings.

On the AV controller, press the input selector for the

input source that you want to set and the

SETUP button

simultaneously. While holding down the input selector

button, press SETUP until “Video ATT:On” appears

on the display. Then, release both buttons. To reactivate

the setting, repeat the above process so that “Video

ATT:Off” appears on the display, and release the

buttons.

• Video Attenuation

This setting can be made for the BD/DVD, VCR/DVR,

CBL/SAT, GAME or AUX input.

If you have a game console connected to the composite

video input, and the picture isn’t very clear, you can

attenuate the gain.

Video ATT:Off: (default).

Video ATT:On: Gain is reduced by 2 dB.

Make sure your server is compatible with the AV

controller.

101,

103

If you download or copy large files on your

computer, playback may be interrupted. Try closing

any unused programs, use a more powerful

computer, or use a dedicated server.

—

If the server is serving large music files to several

networked devices simultaneously, the network may

become overloaded and playback may be

interrupted. Reduce the number of playback devices

on the network, upgrade your network, or use a

switch instead of a hub.

—

If you’re using DHCP, your router may not always

allocate the same IP address to the AV controller, so

if you find that you can’t connect to a server or

Internet radio station, recheck the AV controller’s IP

address on the “Network” screen.

Check the “Network” settings. 68

USB Device Playback

Make sure the USB device is plugged in properly. —

The AV controller supports USB devices that

support the USB mass storage device class.

However, playback may not be possible with some

USB devices even if they conform to the USB mass

storage device class.

—

USB memory devices with security functions cannot

be played.

—

Others

In the following cases, the power consumption in

standby mode may reach up to a maximum of

45 W (North American)/50 W (Others):

– You are using the Universal Port jack.

–“Network Control” is set to “Enable” in the

“Network” setting.

–“HDMI Control(RIHD)” setting is set to “On”.

(Depending on the TV status, the AV controller

will enter standby mode as usual.)

–The “HDMI Through” setting is set to other than

“Off”.

21, 67,

When a pair of headphones is connected, the

listening mode is set to Stereo, unless it’s already set

to Stereo, Mono, Direct, or Pure Audio.

—

In some cases, corrected values suitable for home

theater use may be set automatically.

—

The display is turned off when the Pure Audio

listening mode is selected.

—

Use the “Multiplex” setting on the “Audio Adjust”

menu to select “Main” or “Sub”.

To use u, you must make an u connection and

an analog audio connection (RCA) between the

component and AV controller, even if they are

connected digitally.

While Zone 2 or Zone 3 is selected, the u

functions don’t work.

While Zone 2 or Zone 3 is selected, the u

functions don’t work.

This can be caused by a malfunction in your speaker

unit. Check if the unit produces normal sounds.

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo PR-SC5509 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo PR-SC5509

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info