Bedienungsanleitung Onkyo RBX-500 (Seite 14 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

492683

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

En-14

Troubleshooting

The main unit does not operate, or the operation

is something wrong

• Unplug the power connector once, then insert

the plug again after 10 seconds or more.

• Reset the main unit ( page 14).

The main unit does not turn on

• Check the connection of AC adapter and Power

cord ( page 8).

The main unit turns off without any operation

• Auto standby feature may work ( page 10).

No sound or sound is too small

• Input mode is not correct. Change input mode

correctly by pressing , and button on

the remote controller ( page 9).

• In case that the sound from the external device is

too small through Bluetooth connection or LINE

connection, control the external device to turn up

the sound volume.

iPod/iPhone does not work

• If the case is attached to iPod/iPhone connected

with the dock, remove the case.

• Check if your iPod/iPhone model is compatible

with this product ( page 11).

• If the operation stops suddenly, reset your

iPod/iPhone.

The sound of iPod/iPhone is distorted

• Turn off equalizer or other enhanced sound func-

tions of iPod/iPhone.

• Reset your iPod/iPhone. In case of a model corre-

sponding to multitasking, quit all other applica-

tions.

Pairing of Bluetooth cannot be made

• Refer to the operation manual of the Bluetooth

device.

• Turn off the power of this unit and a Bluetooth

device once, and turn on the power again to try

pairing again.

• Delete the registered data of "Onkyo RBX-500" at

the Bluetooth device side again, and try pairing

again.

Bluetooth connection cannot be made

• Check the Bluetooth device has been powered on

and Bluetooth function is activated.

• Is the distance with the Bluetooth device ade-

quate? Isn't the device blocked by a wall or some-

thing?

The sound through Bluetooth is interrupted

• Keep away from wireless LAN devices, other Blue-

tooth devices or a microwave oven.

• Put the Bluetooth device close to the main unit.

Try changing the location of the Bluetooth device

or the main unit.

The sound of Bluetooth is later than the image

• There is some signal delay because of characteris-

tic of Bluetooth transmission. Therefore, audio

delay to the image on Bluetooth device may

occur.

A device cannot be charged with the USB terminal

on the backside

• Remove your iPod/iPhone from the dock.

Remote controller does not work

• If batteries of the remote controller are

exhausted, replace them with new ones

( page 6).

• Ensure correct use of the remote controller

( page 6).

• Do not expose the light receiving area to strong

light such as direct sunlight or inverter fluores-

cent.

Reset the main unit with the following step:

1. Unplug the DC connector of the AC adapter, and

wait for 10 seconds.

2. Insert the DC connector with depressing on the

 button on the main unit for 2 seconds or more.

3. Wait until the power indicator lights up and then

turns off.

Notes:

Resetting makes all the settings turn to the default

conditions.

Because all the Bluetooth pairing information is

erased, conduct pairing process again if necessary.

Troubleshooting

Reset

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo RBX-500 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info